- Home
- Companies
- Ultrasan Electronic Ltd
- Products
- Expel - Model Pro 300 -300 m2 - ...
Expel - Model Pro 300 -300 m2 -Ultrasonic Mouse Repellent
What Is Expel Pro 300 and What Is It Used For?
Expel Pro 300 Ultrasonic Mouse Repellent; It is used to remove mice from the environment in a monolithic (consisting of a single piece, whole) area of maximum 300 square meters.
Expel Pro 300 is effective on mouse species (sewer rat, field mouse, house mouse, roof mouse etc.).
Expel Pro 300`s ultrasonic sound is extremely disturbing to mice, disrupting their digestive, nervous and reproductive systems; hinders their accommodation.
To give an example; We can issue security or fire alarms used in confined spaces. The louder the sound is to us when the siren is activated, the effect of the device is similar in mice.
What Should Be Considered Before Using Expel Pro 300 Ultrasonic?
- If other applications have been tried in the field before, you should definitely ask for professional support. (It should be a licensed spraying company for your health.)
- If there is an open food, water source and/or mess in the environment, please follow the stacking rules.
- Do not install the device without cleaning the environment. Clean up mouse droppings. If there are physical obstacles that need to be removed, please take them. (For example, holes that open directly out, etc.)
- If the suitable place for device positioning is far from the socket, please have the electrician complete the necessary cable pulling work. Prevent installation by cutting the device plug, and prevent the risk of fire in your home and workplace.
How to Use Expel Pro 300 Ultrasonic Anti-Mouse?
- The Expel Pro 300 should be hung on the wall, practically half the ceiling height, in such a way that it is not obstructed (never mount it on cabinets, shelves, seat backs, etc.).
- The most suitable place for device placement is parallel to security cameras. The best view of the environment is the correct mounting location.
- In very crowded areas such as food warehouses and archive warehouses, take the stack to the appropriate height on the pallet and to the appropriate opening from the wall in accordance with the rules.
- In order for the ultrasonic sounds to surround the whole room and have a strong effect, pay attention to the presence of hard surfaces (walls, etc.) on the opposite side of Expel Pro 300.
- Mice show resistance to adverse living conditions in the area where they live. However, due to the continuity of the negativity, this period is usually 1-2 weeks; It can take up to 4 weeks depending on environmental conditions.
- When the Expel Pro 300 is plugged in, a red light that starts to signal indicates that the device is working properly.
- The Expel Pro 300 must be operated continuously (24/7).
Warranty Process
Expel Pro 300 is guaranteed for 2 (two) years against manufacturing and component defects. The Expel Pro 300 is an electronic device and can be used for years.
- Domain : Max. 300 m2 (solid)
- Working Principle: Ultrasonic sound
- Electricity Consumption: 7 W
- Frequency Range: 30 kHz-55 kHz
- Transmitter Sound Pressure Level (SPL): >114dB at 10v, 30cm (0dB=0.02mPa )
- Transmitter casing: Aluminum
- Operating voltage: 220 – 240 VAC, 50 /60 Hz
- Weight: 140 Gr.
- Dimensions: 125mm x 90mm x42mm (Plastic Box Dimensions)
- Device Box: ABS plastic
- Box color: Gray
- Device works 24/7
- Transmitter speakers are aluminum casing to avoid being affected by external magnetic interference. It is physically protected to avoid electric shock in case of hand contact with the transmitter.
- There is no need to press the button to operate the device. After the device is plugged in, the LEDs start to flash, indicating that the device has started to send ultrasonic sound.
- Thanks to the 2 LEDs on the device, it is understood that the system is working.
- LEDs flash during operation. If it is constantly lit and not lit at all, it indicates a malfunction
- The working principle of the device is in the form of emitting ultrasonic sound. It is not an "Electromagnetic Wave Generator". It does not create an electromagnetic field in the socket it is plugged into. It does not cause any interference.
- The plastic box that protects the working circuit of the device is ABS plastic. It has high impact strength. It is low temperature resistant. It is heat resistant and resistant to weather conditions. Inflammability class A - 1
- The device cable is 180 cm long. It is TS EN 50525-2-11 / H03VVH2-F certified.
- The device is CE certified.
- The device is guaranteed for 2 years free of charge. Paid service and spare parts are guaranteed for 10 years.
- In case of malfunction of the device within the warranty period, due to material and workmanship or manufacturing faults; It will be repaired without any charge for labor cost, replacement part cost or any other name.
- Failure of the device due to use contrary to the user manual or natural disasters; falling, hitting, punching, cutting, etc. damage to its plastic box or cable as a result; If the warranty tape is torn, the device is out of warranty.
