FILTRAMAS - Model RDS -Static Sieve

The FILTRAESTATIC Filter Sieve consists of a metal body, made of stainless steel, which “channels” the fluid to be treated, distinguishing the following parts:

• Power supply box. The fluid to be treated enters through a flange in the rear upper part and the laminar outlet is overflowed.
• Filter chute. In the front part, whose bottom is a screen plate, solid-liquid separation is produced.
• Screen Manufactured with trapezoidal section threads in AISI-304 or 316, separated according to the design light, it constitutes the filtering element of the equipment.
• Filtrate tank. In the lower part, under the screen, it collects the screened fluid that is evacuated by means of a casing.
• The fluid to be treated is piped to the feed box. After a slight retention, there is an overflow of laminar flow which falls gently through the filter chute onto the screen panel. In this sliding process, the liquid passes through the screen (most of it in its first section), the retained solids remaining on the surface of the screen, falling downwards and draining out of the FILTRAESTATIC sieve.
• The sieved liquid falls into the lower tank and is evacuated by means of a gravity or pumping pipe, depending on the design of the installation.

• Irrigation device for washing the screen to maintain its filtering efficiency in the case of fluids containing greasy and sticky solids.
• Deflectors. They are used in filtering panels with small passage lights and liquids with low solid content, causing a slight retention of the liquid sheet that ensures its filtration and passage to the lower tank.
• Screen inclination adjustment mechanism that allows the screen to operate at its the bottom, keeping the upper part fixed; in this way we can regulate its inclination, thus altering the draining of the retained solids.

• Drinking water (passing light between 0.5 and 1.5 mm)
• Urban waste water
• Vegetable canneries
• Fish canneries
• Leather tanneries
• Slaughterhouses