Synergys LEAKSHOOTER - Model LKS 1000-V.3 + PRO -First Compressed Air Leak Detector
This newcomer to the LEAKSHOOTER range becomes the triple ally of the maintenance technician. Indeed, with it he will be able to quickly and efficiently detect and evaluate steam, compressed air, gas and vacuum leaks. With the V3+PRO three skills, hunting for LEAKS, CONTROL of STEAM TRAPS, detection of HOT POINTS.
Currently, monitoring steam traps with conventional detectors is often complex. Today, in the new LEAKSHOOTER® V3+PRO we have optimized the automatic diagnosis.
First, measure the temperature on the piping at the inlet and outlet of your trap.
Then, just wait for the device to do the interpretation work and display the diagnosis.
In addition, the STRAPSHOOTER®+ software is compatible with ?oating ball, inverted float, thermodynamic and thermostatic steam traps.
Accessories needed to control steam traps with LEAKSHOOTER LKS1000-V.3+PRO:
- An ultrasonic contact probe to visualize the operating cycles of the steam traps.
- A 160×120 px infrared camera to measure the temperatures around the steam traps.
- The STRAPSHOOTER+® program to see, listen and automatically assess the status of the steam traps.
- An on-board camera for taking pictures of the steam traps for a PC report.
With the LEAKSHOOTER® LKS 1000-V3+PRO device, you can easily check the condition of your steam traps.
From now on, don`t wait for the situation to become dangerous to carry out an inspection of your installations. For example, water hammer indicates a problem with the evacuation of condensate from your steam installation. This could damage your system or even pose a security problem.
In addition, in the event of a trap stuck open, live steam will be evacuated to the condensate recovery circuit and result in a waste of energy and money.
This is why we recommend that you regularly check your steam trap installations with the LEAKSHOOTER® LKS1000-V3+PRO. Thanks to the dual on-board technology, infrared camera and ultrasonic sensor for acoustic analysis as well as its fully integrated automatic analysis firmware, you will be able to detect your faulty steam traps in a few seconds.
Finally, remember that about 40% of your traps are probably in poor condition, and about 20% of steam is lost through leaky traps.
With the LEAKSHOOTER LKS1000-V3+PRO, optimize your energy efficiency!