Flowline Inc.
- Home
- Companies
- Flowline Inc.
- Products
- Flowline Switch-Pak™ - Model AX13 - ...
Flowline Switch-Pak™ - Model AX13 -Level Switch Package with Level Controller
FromFlowline Inc.
The general purpose level switch package provides high or low liquid level detection with one 16A compact relay controller for pump or valve shut off. The optional flash alarm brings attention to alarm conditions. Available in three level sensor technologies, choose the sensor type based upon your application media. This PP or PVDF level switch package is selected for bulk storage, IBC or drum, and neutralization tank applications, requiring detection and control.
Most popular related searches
level switch
liquid level switch
sensor system
level controller
level sensor
corrosive liquid
shut-off valve
pump control valve
PFAS
pump controller
- Fail-safe relay shut off of pumps or valves with adjustable time delay
- Offered in three sensor technologies for broad application coverage
- Rugged polypropylene or PVDF construction for use with corrosive liquids
- Easy setup with LED indicators for sensor, power and relay status
- Optional strobe brings immediate attention to level alarm conditions
- PP enclosure rated NEMA 4X with swivel base for conduit alignment
- Invert switch changes relay state from NO to NC without rewiring
- Length: 6” to 10’ (15cm to 3m)
- Accuracy: ± 1mm in water
- Repeatability: ± 0.5mm in water
- Orientation: ± 20° vertical
- Switch points: 1 (factory set)
- Supply voltage: 120 / 240 VAC @ 50-60 Hz.
- LED indication: Sensor, power & relay
- Consumption: 0.25A maximum
- Strobe type: -X22X: N/A, -X21X: xenon tube
- Strobe flash: -X22X: N/A, -X21X: 1 per second
- Contact type: (1) SPDT relay
- Contact rating: 250 VAC @ 10A
- Contact output: Selectable NO / NC
- Contact delay: 0.15 – 60 seconds
- Process temp.: F: -40° to 176°, C: -40° to 80°
- Ambient temp.: F: -40° to 140°, C: -40° to 60°
- Installed height: _21_: 6.5” (16.5cm), _22_: 4.9” (12.4cm)
- Pressure: AV13: 25 psi (1.7 bar), AU13 / AZ13: 150 psi (10 bar)
- Enclosure rating: NEMA 4X (IP65)
- Encl. material: -X21X: PP, UL94VO & PC, -X22X: PP, UL94VO
- Conduit entrance: 1/2” NPT
- Wetted material: AV13-42XX: PP, AV13-52XX: PVDF, AU13-42XX: PP, AU13-52XX: PVDF & PFA, AZ13-42XX: PP & Ryton®
- Process mount: -X2X3: 2” NPT, -X2X7: 1-1/2” G
- Classification: General purpose
- Compliance: CE
