- Home
- Companies
- Superior Handling Equipment, LLC
- Products
- Forklift Max - Forklift Max Speed-Lift ...
Forklift Max - Forklift Max Speed-Lift for Heavy-Duty Material Handling
The Forklift Max Speed-Lift is engineered to manage substantial loads and accommodate operation by a seated forklift driver. This rugged, independent, surface-mounted loading dock lift is movable, requiring just a sturdy base and power supply. Notably, it serves as a safe, practical asset rather than a structural expense. Its adaptable design allows usage as, alongside, or behind a dock wall. It efficiently tolerates heavy truck impacts without needing pits or protective measures and facilitates rapid lifting of up to 25,000 lbs from ground level to standard dock heights (44.5”-58”) at impressive speeds of 29 feet per minute. Additionally, it boasts a low profile of 4 inches and incorporates Automatic Folding Ramps (AFR), a robust three-sided steel frame, and maintains a full-load rating across its platform, devoid of end-load or side-load limitations.
The Forklift Max Speed-Lift is designed to handle large loads and be operated by a seated operator of a large forklift. This heavy duty, free-standing, self-contained, surface-mounted, and moveable loading dock lift requires only a solid surface and power. It’s a safe and robust piece of equipment … an asset – not a construction expense. It can be used as your dock, up to a dock, or behind a dock wall. It can handle truck impacts and requires no pit or protection. It can move up to 25,000 LB between standard dock-height (44.5”-58”) to ground … fast (29FPM). It’s also low profile (4”) and very safe with Automatic Folding Ramps (AFR), a 3-sided steel frame, and a full-load rating across the entire platform (no end-load or side-load reduction).
- Surface-mounted and self-contained – mechanical, hydraulic, and electrical systems are within the frame so no separate control unit is required.
- Operate while seated on forklift – Vertical control handle can be reached while seated.
- Integrated truck impact protection – robust construction and padded bumpers – requires no bollards.
- Fast operation – raise/lower at 29FPM – Truck height in seconds.
- Less costly on‐site infrastructure – no pits, drains, bollards, building permits, etc.
- Automatic Folding Ramp & Adjustable Bridge – built-in safety. No safety bars, chains, or flip-over ramps.
- Cantilever lift mechanism – hydraulically actuated with variable speed control for controlled ascent and descent.
- Simple installation – simply place, anchor, and connect to power.
- Moveable – integrated wheels add maneuverability, if needed.
- Load Capacity of 25,000 LB
- No end-load or side-load limitations – full-load rating across platform
- Low-profile – 4”
- Leading Warranty – 15-Year Structural, 5-Year Parts, 2-Year Labor
- UL approved electrical control boxes
- Conforms to ANSI MH29.1 specifications
- Non‐skid diamond plate on the platform, ramp, and bridge.
- Withstands severe weather conditions – operates for 25+ years with routine maintenance.
- Capacity: 25,000 pounds
- Install Locations: Outside or Inside
- Primary Configs: Truck to ground, Dock to ground, Truck to ground-thru wall
- Axle Capacity Ends, Sides: Same
- Standard Platform Sizes (in feet WxL): 6×16, 6×18, 6×20, 7×16, 7×18, 7×20, 8×16, 8×18, 8×20
- Lowered Height: 4”
- Truck-side Adjustable Height Bridge: 44.5-58”
- Motor Size: 20HP
- Cylinder Size: (6) 5” cylinders
- Travel Speed: 29 FPM
- Shipping Weight: 11,800-14,200 LB
- Extended Ramps and Truck Bridge
- CrossDock config – Add hydraulic ramp and additional bumpers
- Extended and Remote Control Handles
- Tapered Ramp and Truck Bridge
- Platform Stops for off‐loading to raised platforms
- Upper Travel Limit
- Side Frame Enclosure
- Accordion Safety Curtain
- Keyed Lock Out
- Motion Warning Indicator
- Tow Bar
- Upper Level Personnel Restraint Bar (non-forklift applications)
- Smooth Deck
- Various Anchor Systems
- 208V 3-Phase Power, 230V 3-Phase Power, 460/480V 3 Phase Power
- Custom Configurations