- Home
- Companies
- Superior Handling Equipment, LLC
- Products
- Forklift Pro - Speed-Lift for Small ...
Forklift Pro - Speed-Lift for Small Forklifts
The Forklift Pro Speed-Lift caters specifically to the operational needs of small forklifts, emphasizing safety and robustness. This versatile, self-contained dock lift is a heavy-duty, surface-mounted solution requiring just a solid surface and power supply for functionality. Designed to act as a standalone dock or in conjunction with existing dock walls, it efficiently manages truck impacts without the need for additional protective measures. Capable of handling substantial loads of either 10000 or 15000 pounds, it allows for swift elevation changes from standard dock heights (44.5”-58”) to ground level at a rate of 33 feet per minute. Despite its substantial capabilities, it maintains a low profile of 4 inches. Key safety features include Automatic Folding Ramps, a steel frame on three sides, and a full-load rating across the entire platform, ensuring no reduction in capacity from end-load or side-load impacts.
The Forklift Pro Speed-Lift is designed to be safely operated by a seated operator of a small forklift. This heavy duty, free-standing, self-contained, surface-mounted, and moveable loading dock lift requires only a solid surface and power. It’s a safe and robust piece of equipment … an asset – not a construction expense. It can be used as your dock, up to a dock, or behind a dock wall. It can handle truck impacts and requires no pit or protection. It can move heavy loads (10000 LB or 15000 LB capacity) between standard dock-height (44.5”-58”) to ground … fast (33FPM). It’s also low profile (4”) and very safe with Automatic Folding Ramps (AFR), a 3-sided steel frame, and a full-load rating across the entire platform (no end-load or side-load reduction).
- Surface-mounted and self-contained – mechanical, hydraulic, and electrical systems are within the frame so no separate control unit is required.
- Operate while seated on forklift – Vertical control handle can be reached while seated.
- Integrated truck impact protection – robust construction and padded bumpers – requires no bollards.
- Fast operation – raise/lower at 33FPM – Truck height in only 8 seconds.
- Less costly on‐site infrastructure – no pits, drains, bollards, building permits, etc.
- Automatic Folding Ramp & Adjustable Bridge – built-in safety. No safety bars, chains, or flip-over ramps.
- Cantilever lift mechanism – hydraulically actuated with variable speed control for controlled ascent and descent.
- Simple installation – simply place, anchor, and connect to power.
- Moveable – integrated wheels add maneuverability, if needed.
- Load Capacity of 10,000 or 15,000 LB
- No end-load or side-load limitations – full-load rating across platform
- Low-profile – 4”
- Leading Warranty – 15-Year Structural, 5-Year Parts, 2-Year Labor
- UL approved electrical control boxes
- Conforms to ANSI MH29.1 specifications
- Non‐skid diamond plate on the platform, ramp, and bridge.
- Withstands severe weather conditions – operates for 25+ years with routine maintenance.
- Capacity: 10,000 or 15,000 pounds
- Install Locations: Outside or Inside
- Primary Configs: Truck to ground, Dock to ground, Truck to ground-thru wall
- Axle Capacity Ends, Sides: Same
- Standard Platform Sizes (in feet WxL): 6×10, 6×12, 6×14, 7×10, 7×12, 7×14, 8×10, 8×12, 8×14
- Lowered Height: 4”
- Truck-side Adjustable Height Bridge: 44.5-58” standard (lower available)
- Motor Size: 15 HP (10K model), 20HP (15K model)
- Cylinder Size: (4) 5” cylinders
- Travel Speed: 33 FPM – 8 seconds from truck height to ground
- Shipping Weight: 8,000-11,000 LB
- WeatherShield or CoverDock system
- Extended Ramps and Truck Bridge
- Modified Adjustable Height Bridge – as low as 11” and high as 70”
- Extended and Remote Control Handles
- Tapered Ramp and Truck Bridge
- Platform Stops for off‐loading to raised platforms
- Upper Travel Limit
- Side Frame Enclosure
- Accordion Safety Curtain
- Keyed Lock Out
- Motion Warning Indicator
- Tow Bar
- Smooth Deck
- Various Anchor Systems
- 208V 3-Phase Power, 230V 3-Phase Power, 460/480V 3 Phase Power, or 208V Single Phase Power
- Custom Sizes and Capacities Available.