Founten - Model FS-TA1 -Temperature and Alarm Sensor
The Founten Temperature and Alarm Sensor is an add-on accessory to the Founten FS-STAT-32AC or FS-STAT-32ACH. It is connected to the Founten thermostat using 3 wires to provide power and communication. Once connected it provides an input for either an external temperature probe (for temperature monitoring and control) or to add a dry contact input to generate an alarm notification through the Founten Site Manager. The applications where this device can be used are: to detect the temperature inside of an enclosed refrigerator or freezer, to be placed on a wall in a conditioned space with the thermostat installed in a non-visible location, to monitor supply air or outside air temperature, or to interface with a water detector or similar device to generate a notification alert.
- 3-wire connection to your Founten thermostat
- Comes with an internal 10K temperature probe
- Accepts 2-wire 10K external temperature probes.
- Accepts either a normally open or normally closed Alarm input.
- Set-up via Founten web-based app
- Can average temperature between FS-TA1 and an FS-STAT-32AC(H)
- Continuously collects historical temperature data.
Wiring
- 3-wire to FS-STAT-32AC(H) – D, R, C
- 2-wire 10K temperature probe -100ft. max distance
- 2-wire dry contact relay input – 150ft. max distance
Electrical
- Power – hardwire 24VAC, 15mA
- Voltage – 22-28VAC
- Thermistor – 10K Type 2
External Probe Temperature Range
- -20F to 180F (-28C to 82C)
Dry Contact Relay
- Normally open or normall closed
Operating Range
- -4F to 122F (-20C to 50C)
- Humidity 5 to 90%
Size
- Dimensions (in.) H 2.5″ x W 2.25″ x D .75″
- Dimensions (mm) H 63 x W 57 x D 19
- Mounting – Vertical (logo at bottom)