- Home
- Companies
- Fraco Products Ltd.
- Products
- Fraco - Model SEH Series - Rack and ...
Fraco - Model SEH Series -Rack and Pinion Construction Hoists
Fraco SEH Series rack and pinion construction hoists are designed for a safe and efficient transport of personal and material. On request, Fraco can customize car size, speed, payload and finish to adapt to the needs of general contractors, property developers and equipment rental companies. Mostly used for building construction, SEH Series elevators can also serve for bridge construction and industrial projects. Some models can be used in single or twin cars configuration and can be combined with other Fraco products. Cars are delivered with flexible and adjustable tie systems that can reach top or face of slab. SEH Series are designed to reduce downtime on jobsite. They are built with common electrical and mechanical components easily available from local suppliers. All models are equipped with relay based control system for easier troubleshooting. A sliding door that allows lateral loading is available as an option with heavy range models.
Standard car length: 3,8 m
Available payloads: 2 040 | 2 720 | 3 175 | 3 640 kg
Number of persons: 30
Travel speed (normal - mid - high): 40 m - 60 m - 90 m / min
Maximum height: 400 m
Standard distance between anchors: 9 m
Lifting system: Rack and pinion (module 8)
Type of engine (power supply): Electrical motors (3 Phase 480 V / 60 Hz)
Internal car dimensions (L x W x H) / wWeight: 3,8 m x 1,45 m x 2,1 m / 3 400 kg
Mast section dimensions (L x W x H) / Weight: 0,65 m x 0,65 m x 1,5 m / 155 kg
Type of operation: Control panel with push buttons
Standard compliance: ANSI A10.4-2007; CSA Z185-M87; EN 12159
Standard car length: 12 ft 6 in
Available payloads: 4 500 | 6 000 | 7 000 | 8 000 lb
Number of persons: 30
Travel speed (normal - mid - high): 130 ft - 200 ft - 300 ft / min
Maximum height: 1 310 ft
Standard distance between anchors: 30 ft
Lifting system: Rack and pinion (module 8)
Type of engine (power supply): Electrical motors (3 Phase 480 V / 60 Hz)
Internal car dimensions (L x W x H) / wWeight: 12 ft 6 in x 4 ft 9 in x 7 ft 2 in / 7 500 lb
Mast section dimensions (L x W x H) / Weight: 26 in x 26 in x 60 in / 341 lb
Type of operation: Control panel with push buttons
Standard compliance: ANSI A10.4-2007; CSA Z185-M87; EN 12159