Spring Protezione - Model 3000 -Full Face Mask

MATERIALS
The IN 150/2 full face mask is made by the following materials:

• Body of the mask: synthetic rubber
• Visor: polycarbonate
• Filter holder(connection): Nylon
• Harness: synthetic rubber

FILTER IN-2
The IN 150/2 full face mask can be used with InAir IN2 series of gas, particle and combined filters, equipped with special bayonet connection.
The filters are fitted directly on the lateral connections of the mask.

DIRECTIONS

• Exposure limits for full face masks:
• Full face mask + Pi filter = 4 x TIV
• Full face mask + P2 filter = 16 x TIV
• Full face mask + P3 filter = 400 x TIV

Exposure limits for full face masks with gas filters:

• Full face mask + class 1 filter = 400 x TLV (or 1000 ppm)
• Full face mask + class 2 filter = 400 x TLV (or 5000 ppm)
• Full face mask + class 3 filter = 400 x TLV (or 10000 ppm)
• According to EN 529:2005

Storage
Storage time: 10 years (factory sealed), as showi on label Storage conditions: temperature range -10°C and +50°C, Relative Humidity 80%, as shown on label (pictogram of thermometer and umbrella)

Certification
The IN 150/2 full face mask fulfils the requirements of EN 136:1998 standard and is CE marked, according to 89/686/ECC European Directive, as a PPE of III category. Italcert srl (Notified Body n* 0426) is responsible of the CE Certification (Art 10) and of controls (Art 11B).