Avermann - Model Type AVOS 88 B -Fully Automated Compact Horizontal Baler
Compact and economic solution for highest efficiency. With the horizontal baler type AVOS 88, you achieve maximum continuity. Whether paper, cardboard, or foil - this press delivers convincing performance every day with high efficiency and cost-effectiveness. Highly compacted, fully-automatic bound bales enable space-saving storage and cost-optimized transport. Long lifetime, low energy consumption, and easy handling - this machine leaves nothing to be desired.
The fully automated horizontal baler AVOS 88 is perfectly suitable to compact cardboard, paper, plastics, and other recyclable materials. State of the art technology according to the C standard for horizontal balers published in 2013 (DIN EN 16252).
- The frame of the machine consists of a solid welded construction and is provided for the fastening on the floor with dowels.
- Rapid motion/power speed control system as well as an automatic speed adaptation, depending on the necessary pressing power, for the increase of the throughput capacity.
- Cutting knives on the force plate and on the counter plate for cutting off the overhanging material in the hopper section. Temper of the knives: 56 + 4 HRC
- Press ram guiding with low-maintenance plastic guides, highly wear-resisting, and indifferent to dust. Excellent accessibility for easy adjustment of the press ram guides, to minimize cutting forces.
- Press ram cover for continuous feeding.
- Three-sided adjustment of press channel, regulation depending on pressing power, to achieve maximum bale weights.
- Automatic binding with drill fingers made of highly wear-resisting NAXTRA material as well as separate wire cutting knife guarantees a safe binding of bales.
- Wire diameters available: 2.8 mm (standard)/3.1 mm
Electrics:
- Free programmable PLC, Siemens Simatic S 7, including switching and control elements.
- Potential free contacts for emergency stop, automatic mode, general fault, overfill protection, material feed conveyor belt.
- Integration of external emergency stop in the baler control.
- Electrically controlled bale length measuring system.
- Touchscreen display: 7.5’’ TFT – 96 MB, 640 x 480 pixels (SVGA), for operation of the machine incl. presentation of the operation condition and press performance. Possible errors are also shown and described on the panel. Operating temperature from 0° to 55° C.
- Heating of the control cabinet.
- Photo cells inside the hopper of the baler for the press stroke control and as overcharge protection.
Hydraulics:
- Capacity controlled, power saving press ram drive via axial piston pump.
- Type Rexroth A10, operating pressure 220 bar.
- First equipment of hydraulic oil HLP 46, capacity: 450 l, with oil level switch which switches off the machine in case of an excessively low oil level.
- Oil/Air cooling unit for the hydraulic oil.
- Oil filtration with 3 µm filter.
- Hydraulic unit with screwed-on valves mounted on the hydraulic block, easily accessible for maintenance.
- Rexroth valve technology for gentle and energy-saving system operation.
Your benefits:
- Savings: Low power consumption
- Flexible: Individual equipment options
- Space saving: Suitable for applications with limited space
You specify the details – for an optimal setup:
- Manual feeding hopper
- Bale chute
- Other options possible
Valid for all machine types:
- Bale length: Adjustable
- Binding: 4-fold vertical
- Electricity: 3 x 400 V, N, PE/50 Hz
- Fuse protection (on site): 63A