Lamsystems - Model SHV-1,0-Laminar-S -Fume Hood

Application of the Fume Hoods 

Fume hoods are used for chemical-analytical studies and works causing and spreading toxic vapors and gases harmful to human health. Fume hood is used as a part of external exhaust system in laboratories with different profiles. 

Work Chamber

• Front sash is hinged, made of tempered glass; opening/closing mechanism is gas springs;
• Metal side walls;
• Luminance of the work chamber;
• Sockets unit inside the work chamber;
• Stainless steel tabletop

UV unit

• Pull-out UV unit located under the tabletop.

Air Exhaust Elements

• Auxiliary blower;
• Back-flow valve with connecting flange to the exhaust system Ø 250 mm;
• Goffered metal hose Ø 250 mm, length 2.5 meters;
• 2 quick-release pipe bridges for metal hose attachment.

Control system elements

• Highlighted key switch for switching on/off the power to the cabinet, for switching on/off the light, for switching on/off the fan.
• UV control unit is equipped with anti-vandal buttons and timer with display with seven segments. 

Support

• Frame stand with foot rest;
• Screw supports are available for stationary positioning of the cabinet at the exploitation sight

• Dimensions of the assembled cabinet with stand, mm (WхDхH) 1020х621х1920
• Dimensions of the work chamber, mm (WхDхH) 1020х621х1120
• Mass of assembled cabinet with the stand, kg, not more than 84
• Input power of the cabinet, W, not more than (exclusively of the load on the built-in outlets) 90
• Input power of the fan, W, not more than 31
• Maximum load allowed on the sockets, W 1000
• Luminance level in the work zone, lux, not less than 1000*
• Airflow outflow volume, m3/hr, not less than 400
• Noise level at the 1 m distance from the cabinet, dB, not more than  55

• gas tap without electromagnetic valve
• vacuum tap without electromagnetic valve
• additional set of sockets (installed on the left side)
• stainless steel sink 165х288х120 together with drain valve and mixer tap (0.05.1) (installed on the left side)
• stainless steel sink 165х288х120 together with drain valve and mixer tap (0.05.1) (installed on the right side)
• mixer tap for water supply (hot/cold)
• tap for water supply (brass) (model 11080.1)
• cabinet base with an air vent (together with the fume hood)/(in a separate package)
• tabletop “Polystone”