Geotech Environmental Equipment, Inc.
- Home
- Companies
- Geotech Environmental Equipment, Inc.
- Products
- Geotech - Gauge Pressure Transducers
Geotech - Gauge Pressure Transducers
Geotech`s submersible pressure transducers are designed for ruggedness and long life to meet the harsh environments encountered in liquid level measurement and control.
Most popular related searches
pressure transducer
water monitoring well
surface water monitoring
water level logging
liquid level monitoring
submersible pressure transducer
gauge pressure transducer
water well monitor
water well monitoring
pump controller
- High static accuracy and repeatability
- 100% computer tested, calibrated and temperature compensated
- 750` (229m) maximum cable length
- All wetted materials are #316 stainless steel
- Sensor has ¼" NPT process fitting with protective cap
- Vent line in cable allows barometric compensation of level readings
- Field replaceable desiccant cartridge or Aneroid Bellows for moisture protection
- Optional surge suppressor for lightning protection
Electrical:
- Supply Voltage: 12-36 Volt DC
- Supply Current: 25 mA
- Output: 1-5 Volt DC, 4-20 mA, and Modbus 485
Performance::
- Pressure Ranges (psi): 0-3, 0-5, 0-15, 0-30, 0-50, 0-100, 0-150
- Pressure Ranges (bar): 0-.2, 0-.34, 0-1, 0-2, 0-3.5, 0-7, 0-10 (Custom ranges available)
- Accuracy:
- 0.25% of full scale
- 0.1% of full scale available
- Non-Linearity: .07% of full scale
- Repeatability: 0.015% of full scale
- Pressure Hysteresis: 0.010% of full scale
- Zero Error: ±0.1% of full scale
- Span Error: ±0.1% of full scale
- Temperature Sensor Range: -40° to 257°F (-40° to 125°C)*
- Temperature Accuracy: ±1.8°F (0.5°C) nominal full scale
- Temperature reporting is only available with RS485 communications.
- Compensated Temperature: -4° to 185°F (-20° to 85°C)
- Operating Temperature: -40° to 257°F (-40° to 125°C)
- Response Time: 2 milliseconds
- Life: 1 million pressure cycles
Physical:
- Sensor Length (Includes 2" Strain Relief)
- With Surge Suppressor
- Without Surge Suppressor:
- 8.6" (21.8 cm)
- 7.7" (19.6 cm)
- Sensor Diameter: .72" (1.8 cm)
- Sensor Weight: 4.3 oz. (122 g)
- Proof Pressure: 3x psi
- Burst Pressure: 5x psi
- Media Compatibility: Liquids or gasses compatible with 316 stainless steel
Cable:
- Jacket: Polyurethane or Tefzel® (Vented)
- Diameter: .335" to .360" (8.5mm to 9.14mm)
- Conductors: 4-24 AWG 7/32 tinned copper Red – White – Blue – Orange
- Drain: 24 AWG 7/32 tinned copper bare
- Vent Tube: Nylon 6/6 vent tube
* Installation is not recommended in environments where liquids freeze solid.
Note: Probe is protected from reverse polarity supply connection.
- Groundwater Monitoring
- Surface Water Monitoring
- Well Monitoring
- Wetland Studies
- Remediation Pump Control
- Landfill Pump Control
- Fluid Level Control
