- Home
- Companies
- Gillard S.A.S.
- Products
- Gillard - Model Paktor 21 Series - ...
Gillard - Model Paktor 21 Series -Single-Unit Waste Compactor
The PAKTOR Series 21 monobloc compactor is a solution perfectly suited to the needs of communities, waste management companies and manufacturers looking for reliable, easy-to-install and customizable compaction equipment . Thanks to its robust structure and powerful compaction system, it can significantly reduce the volume of waste while optimizing collection cycles.
A design thought out for efficiency
The PAKTOR Series 21 compactor is based on a welded mechanical structure , guaranteeing very good durability over time. It is equipped with two centrally-thrust hydraulic cylinders ensuring a constant pressure of 38 tonnes on the shield. The latter is guided by a centralized system on rails , which limits the risks of blockage or misalignment during compaction cycles.
The large bucket (2040 x 1940 mm) facilitates the introduction of large volumes of waste, and its conical design promotes rapid emptying without residue. The volume processed per cycle is 1.15 m³ , with an optimized cycle time of 45 seconds , which allows a high rate to be maintained even during sustained use.
- Bucket dimensions : 2040 x 1940 mm
- Shield : 2000 x 500 mm, penetration 150 mm
- Maximum pressure : 230 bars
- Cycle volume : 1.15 m³
- Cycle time : 45 s
- Electric motor : 5.5 kW – Three-phase 220/380 V
- Empty weight : 4,990 kg
- S235 steel : 3 mm base, sides and roof
- Rear ratchet locking system
- Reinforced hinges , hatches with rubber seals
- Integrated sensors : temperature and oil level
The PAKTOR Series 21 compactor is fully configurable to meet all installation scenarios:
- Manual or assisted opening hood
- Secure side hatch for manual loading
- Hydraulic rear door
- Integrated or autonomous container lifters (front or rear)
- Dockside feed hopper
- Remote controls
- Customizable advertising sheets
- Dimensions adjusted on request (height, length)
All options are designed to facilitate integration into existing installations while ensuring ergonomics and safety . The reinforced sealing of the rear door limits leaks and optimizes site cleanliness.