- Home
- Equipment
Refine by
Binmaster Environmental Equipment & Supplies
112 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
FD2000 - Microwave flow / no flow monitor in IP 64 enclosure, 24 VDC, certified for Class II Groups E, F, & G. Flow Detect 2000 is a flow sensor to detect dry solids flow in any processing ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Standard silcone airbrator is a material fluidizer utilizing both aeration and vibration. Constructed of molded silicone pad with a stainless steel ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21 - Vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-140-X - Vibrating rod level sensor, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F (250°C). Must add rod pipe ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-C - Pre-configured vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Extended rotary protects against overfilling. Vertical extensions are used for top-mounted BMRX rotaries to get high-level alerts. Custom extensions are available up to 144”. Top-mounted, vertically oriented extensions measure further down into the bin to prevent overfilling or protect valuable continuous level sensors at the top of the bin. Consult with a BinMaster ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
AP-F-SS - Air pad with stainless steel body, fiberglass diffuser cloth, and stainless steel 16 mesh diffuser ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The VRX21 vibrating probe level sensor is the newest iteration of BinMaster’s standard vibrating rod, now including a bright, built-in LED status indicator. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The GWR-2000 guided wave radar uses TDR time domain reflectometry to measure the level of solids with a dielectric constant as low as 1.3 in bins and silos up 100' ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
This radar level sensor measures solids or liquids! The NCR-86 mounts simply through a 1.5” NPT threaded connection. It is compact and lightweight, yet resistant to interference from dust, steam, and noise. Performs accurately in excessive temperatures and high-pressure ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
With a built-in 4-20 mA output and integrated keypad, the SmartBob AO level sensor automatically transmits data to a PLC each time it takes a ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BM-25-R diaphragm switch is a pressure switch for high or low-level alerts in bins containing non-hazardous, free-flowing dry materials. It is mounted ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1/4” Galvanized NPT female coupler to attach paddle to shaft extensions or shaft extensions together. Drilled and ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Measure solids or liquids at distances up to 393 feet with the NCR-86 metal-jacketed level sensor.This versatile radar level sensor has built-in 80 GHz frequency making it adaptable to material of any bulk density or specific ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1/4”Ø Stainless steel shaft extension, includes paddle ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
AP-MK - Air pad mounting kit for use with AP, AP-SS,AP-F, and AP-F-SS air ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap I-3A Power Pac is designed for sanitary, point-level detection in food and dairy processing. Built to meet 3-A requirements, it ensures reliable performance while maintaining strict hygiene standards. A universal power supply, bright LED status light, and “Quick-Set” calibration make installation and operation simple. The unit offers DPDT relay output with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
AP-F - Air pad with zinc-plated steel body, fiberglass diffuser cloth, and galvanized steel 16 mesh diffuser ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-X - Vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...