GPro - Model 500 - Carbon Monoxide Sensor
The most accurate and reliable instrument for efficient combustion control applications. The GPro 500 CO TDL is the most accurate and reliable instrument for efficient combustion control applications. By allowing trim control operation mode, the excess air limit can be lowered and adapted to changing conditions without jeopardizing safety.
Fast CO monitoring is used in:
Fast CO monitoring is used in:
- Process control
- Combustion
- Fired heaters
- Incinerators
Features & Benefits:
Tunable Diode Laser spectroscopy
- Dependable, industry-proven technology
Simple installation
- Thanks to probe design and single flange connection
In situ measurement
- Direct measurements in the gas stream are fast and reliable
SpectraID technology
- For highly reliable O2 measurement
Low cost of ownership
- No sampling or conditioning equipment. Annual verification and periodic optics cleaning are the only maintenance
Low nitrogen purging consumption
- For lower operation costs
Predictive ISM diagnostics
- Continually monitor optical path quality to determine when cleaning will be required
Specifications
- Effective path length:
- Probes: 100, 200, 400 mm (3.94', 7.87', 15.75')
- Wafer cell: 50, 80, 100 mm (1.96', 3.15', 3.94')
- Extractive cell: 200, 400, 800, 1000mm, 10m
- Lower Detection Limit: 1 ppm-v
- Measurement range: 0-20,000 ppm (0-2%)
- Accuracy: 2% of reading or 1 ppm, whichever is greater
- Linearity: Better than 1%
- Resolution: 1 ppm-v
- Drift: Negligible (<2% of measurement range between maintenance intervals)
- Sampling rate: 1 second
- Response time (T90): CO in N2 300 ppm-v to 0% in <4 sec
- Repeatability: ±0,25% of reading or 5 ppm-v CO (whichever is greater)
- Process pressure range: 0.8 bar - 2 bar (abs)/11.6 psi - 29. psi (abs)
- Process temperature range: 0-250 ºC(32-482 ºF)
- Optional(for probe instalation) 0-600 ºC (0-1112 ºF) with additional thermal barrier
Customer reviews
No reviews were found for GPro - Model 500 - Carbon Monoxide Sensor. Be the first to review!