- Home
- Companies
- Ixom Watercare
- Products
- Medora GridBee - Model GF5000 - ...
Medora GridBee - Model GF5000 -Grid-Powered Water and Wastewater Mixers
FromIxom Watercare
Floating, AC powered, circulation equipment for wastewater treatment and freshwater applications. Continuous operation on single-phase AC power.
Most popular related searches
wastewater treatment system
wastewater mixer
floating wastewater mixer
flotation system
wastewater treatment
floating mixer
strainer
SCADA
intake strainer
water mixer
- Materials of Construction
- T316 stainless steel constructions.
- Foam-filled high-density polyethylene (HDPE) floats.
- Thermoplastic rubber intake hose. HDPE Strainer.
- Flow Rates
- Flow rates at full speed at 10 feet (3.0 meter) diameter
- Direct Flow Rate: 700 gpm (2,650 lpm)
- Induced Flow Rate: 4,300 gpm (16,300 lpm)
- Combined flow Rate: 5,000 gpm (18,950 lpm)
- Drive System - High torque, direct drive (no gearbox), low voltage brushless D.C. motor.
- Minimum Water Depth - Minimum of 30 inches (0.8m) operating depth required with fixed horizontal plate. No damage to machine or bottom of reservoir when run dry in shallow water.
- Flotation System - Three floats in triangular pattern each with an adjustable float arm for proper vertical positioning, total float buoyancy of 1,450 lbs (660kg).
- Electrical Requirements - Requires single phase 120VAC /60Hz / 15 Amp Service. (Not supplied by Medora Corp.)
- Wiring Controls - Includes power box which converts 120VAC to low voltage DC power. Includes submersible, SOOW type, cable with inhibitors for UV protection. SCADA accessory compatible.
- Rotating Assembly - Removable assembly with easy access to motor and power box. Impeller handles 4-inch (10cm) spherical solids. Oil-filled (food grade) teflon freeze sleeve with o-rings, shaft. Rotational indicator on shaft.
- Fluid Intake Assembly - Option 1 - Hose system bolted to bottom of structural assembly.
- Hose System: 20 to 60 feet (6 to 18m) available in 16-inch (40cm) diameter x 20 feet (6m) sections.
- Intake Type : Inverted bell shape strainer with 4-inch (10cm) holes.
- Intake Depth Adjustment: Can vary from 0 to 60 feet (0-18m). No depth adjustment necessary for fluctuations in water level. Weight and flotation of the `J` bend of hose keeps intake above sludge or bottom of pond at all operating depths. Strainer can be chained up higher if desired.
- Fluid Intake Assembly - Option 2 - Fixed horizontal plate bolted to bottom of structural assembly.
- Intake Type : Fixed horizontal plate with 12-inch (30cm) openings.
- Intake Depth Adjustment: No adjustment necessary. Horizontal inflow from 25 in (64cm) below distribution dish.
- Fluid Intake Assembly - Option 3 - See GF5000DM Dual Mix Features Sheet. Anchoring - Tethered to shore with SS cable.
- Ice Protection - Freeze sleeve and positive pumping under distribution dish to maintain circulation.
- Accesories Available - (1) Chemical Injecion Kit (2) SCADA Accessories
- Shipping Size / Weight
- Crate - 87in x 87in x 65in (2.2m x 2.2m x 1.7m) / 1500lbs (680kg) Exact weight and dimensions varies dependent on
- machine configuration.
- Life / Maintenance / Warranty - 25-year design life, minimal maintenance. Limited 2-year parts and labor warranty.
- 10 year motor warranty.
