Guote - Model GHG -Single Drum Dryer

• Guote GHG dryer is widely used in building materials, metallurgy, chemical industry, cement industry drying slag limestone, coal powder, slag, clay and other materials.

1. The whole production line is equipped with high temperature resistant environmental protection dust collector, and there is no dust and pollutant emission in the whole production process.
2. The whole set of equipment has simple and reasonable structure, convenient operation, low failure rate and convenient maintenance.
3. The heat source can use biomass raw materials or natural gas, high thermal efficiency, environmental protection and no pollution.
4. There is a material raising device inside, so that the material is evenly dispersed, which is conducive to water evaporation and external heat preservation.
5. The dryer cylinder is made 304 stainless steel welding, high purity and no pollution.

Wet materials are sent to the hopper by belt conveyor or bucket elevator, and then enter the feeding end through the feeding pipe through the feeding machine of the hopper. The slope of the feeding pipe should be greater than the natural inclination of the material, so that the material can flow into the dryer smoothly. The dryer drum is a rotating drum that is slightly inclined to the horizontal. The material is added from the higher end, the heat carrier enters from the lower end and makes countercurrent contact with the material. There are also heat carriers and materials that enter the cylinder downstream together. A copy plate is installed on the inner wall of the cylinder. Its function is to copy up and scatter the material, so as to increase the contact surface between the material and the air flow, so as to improve the drying rate and promote the advancement of the material. The dried material falls onto the conveyor belt through the discharge port and is driven into the finished product bin.