Hengmu - Model YHM60 Series -Hammer Mill

1. The shell is welded by steel plate, the site in the crush room which connects to the materials all use the wearable and commutative parts and double wear plate.
2. Coarse and fine powder can both be achieved by adjusting the gaps between hammer and the screen by changing the location of the pin rod.
3. The motor and rotor are installed in the same heavy-duty base, using coupling direct drive,the rotor are checked by dynamic balance, and can work forward and reverse, the hammers are arranged symmetrically.
4. The second grinding for grinding chamber, the output can increase 15% even particle size.
5. Stable running and low consumption
6. Grinding with uniform size

The material needs to be ground be fed into the top intake port through the feeding device which matches this  hammer mill, enters into the grinding room from the left or right side through intake direction plate. Under the  beating of high speed rotating hammer and the rubbing effect of screen, material is grinded gradually, and  discharged from the seat discharging port through screen holes under the effect of centrifugal force and airflow