- Home
- Companies
- Hessels Zeefbanden
- Products
- Split - Model PE - Hard Polyethylene ...
Split - Model PE -Hard Polyethylene Tube
Split-PE is a hard polyethylene tube, split over its entire length. Because of the hardness of split-PE, it cannot be used as protection against damaging. Split-PE is only used to reduce the gap between the rods. The biggest advantage of split-PE is that it can be mounted or removed at any time.
All rollers are manufactured with 2 sealed bearings and an axle with or without thread (AM) or a hollow axle (BD). Of course we can also supply rollers with only the bearings.
To make mounting easier, we generally supply the rollers with a threaded axle with a hexagonal hole (6K). Other possibilities are a saw cut (ZS), flat surface (VB) or a flat piece (VK) on the shoulder.
As an option many rollers are available with a hollow axle, type BN. This axle is shorter than the hollow axle type BD. With the hollow axle type BN the bolt head is positioned within the roller. After fitting the roller will be closed by means of a nylon cap.
- Split-PE 6×9 polyethylene
- Split-PE 8×12 polyethylene
- Split-PE 9×12 polyethylene
- Split-PE 10×14 polyethylene
- Split-PE 10×16 polyethylene
- Split-PE 11×16 polyethylene
- Split-PE 11×18 polyethylene
- Split-PE 12×16 polyethylene
- Split-PE 14×18 polyethylene
- Split-PE 16×20 polyethylene
- Split-PE 15×21 polyethylene