Badger Meter, Inc.
- Home
- Companies
- Badger Meter, Inc.
- Products
- Hedland - Flow-Alert Reed Switch
Hedland - Flow-Alert Reed Switch
Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.02 - 0.2 GPM (0.1 - 0.75 LPM) up to 10 - 150 GPM (50 - 560 LPM). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF, and BSPP. Pressure up to 6,000 psi (414 bar) maximum. Temperature up to 240 °F (116 °C). Accuracy ±2% full scale. Repeatability ±1%.
Most popular related searches
phosphate ester fluid meter
flow switch
shock and vibration
flow meter
epoxy coating
calibration standard
mechanical switch
- Standard calibration: 1.18 specific gravity
- Install in any position
- Easier to read linear scale
- No flow straighteners or special piping required
- Relatively insensitive to shock and vibration
- Good viscosity stability
- Housing: Anodized and epoxy-coated aluminum with polycarbonate lens
- Rating: NEMA 12 and 13 (IP52/54)
- Reed Switch: Single(1) or Double(2) prewired single-pole, single-throw (SPST-NO) normally open or single-pole, single-throw (SPST-NC) normally closed
- Connection: 4 pin (Protection Class IP65)
- Includes: Basic flow meter with Flow-Alert flow switches
- Optional: Special scales available