Hengyang - Scheelite Flotation Processing Line Mining Plant
Counterattack type crusher is suitable for processing side length is not more than 500mm not more than 350 MPa compressive strength of coarse medium and fine materials (granite limestone concrete etc.) are widely used in hydropower highway arti Hengyang ScheeJite dressing can use gravity, magnetic and flotation separation. The types and properties of the ore decide the separation methods and processes. Basing on good floatability of scheelite, the flotation is selected.
Introduction
Scheelite flotation product line is suitable for the scheelite containing multi metals with complex structure.
Separation of scheelite and calcspar & fluorite
Concentration pulp with high temperature is common method. First, the pulp is concentrated to 60%-70%; the next, sodium silicate is added into pulp; then, the pulp is heated to 80°C and stirred for 30-60min; the last it is diluted with water. The floatation of scheelite is under the room temperature, and the product in tank is calcspar & fluorite.
The separation of scheelite and barite
It is difficult to separate scheelite and barite by sodium silicate because of the closed inhibitory action for scheelite and barite. We choose alkyl sulfate as collector to repeatly select barite under the 1.5-3PH, and the product in tank is scheelite.
The separation of scheelite and sulfide
Xanthate is used to capture sulfide minerals in scheelite floatation. We add a little oxide and sodium sulfide to inhibit sulfide
without floatation.
The separation of scheelite and Quartz silicate
Oleic acid as collector and sodium silicate as inhibitors, which could inhibit the quartz and silicate gangue and float scheelite.