Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Sontheim Industrie Elektronik GmbH
About
Downloads
  2. Companies
  3. Sontheim Industrie Elektronik GmbH
  4. Products
  5. Sontheim COMfalcon - Model plus - ...

Sontheim COMfalcon - Model plus -High-end VCI with LUA Scripting and Linux Operating System

SHARE

Housing and status display: The interface has a robust aluminium housing with protection class IP65. Due to the com­pact design and the high shock resistance COMfalcon® plus can be used in different areas of the automation and automotive in­dus­try. Two 14-segment displays and nine LEDs always indicate the current operating status/error code of the device.

 

Most popular related searches
level monitoring
oscilloscope
  • 4× CAN interface acc. to ISO 11898
  • WLAN interface
  • RS232, K-Line
  • Protocol handling
  • Optional with data-logging, scripting, CAN voltage level oscilloscope funcionality
  • Optional with integrated SD card
  • Compact housing with protection class IP65

Interfaces

The COMfalcon® plus has a total of four CAN interfaces and a Freescale PowerPC arch­i­tec­ture. The connection to the diagnostic PC is established via WLAN/LAN or bluetooth as an option. In addition to the CAN channels other interfaces such as RS232 or K-Line are available for diagnostic purposes.

LUA scripting

Own embedded applications run directly on the COMfalcon® plus in LUA without the need for a third device (laptop or PC). Among other things, it is possible to store your own in­for­ma­tion such as create and implement flash routines or ECU de­scrip­tions and thus access the CAN or file sys­tem, for example. Furthermore, the em­bed­ded applications are portable and can be reused for future Sontheim VCI gen­er­ations.

Error frame detection

This function enables the monitoring and ob­ser­va­tion of a CAN network. The COMfalcon® plus has its own logic to detect error frames and to count up in a certain inter­nal memory area. This is used to identify intermittently occurring errors such as fake mes­sag­es of a CAN participant.

ID related level measurement – resistance measurement/current measurement

This feature enables the CAN levels to be read in IO-related as well as active and passive termination resistors to be measured and thus, for example, to carry out fault diagnosis on a vehicle or machine. This is particularly important if data is lost from the network, which can be caused by short circuits, for example.

  • CPU: Freescale PowerPC
  • RAM: 64 MB
  • Memory: 4 GB (for data logging optionally up to 32 GB Flash NAND)
  • CAN: 4× CAN interface acc. to ISO 11898
  • Baud rates: 50 Kbit/s up to 1 Mbit/s
  • CAN Termination resistance measurement: Terminating resistor of the vehicle CAN network with active bus
  • CAN Port: 2× 7-pole M16 port (like Sontheim CANUSB-2)
  • RS232, K-Line:
    • M12 5-pin female connector
    • K-/L-Line (acc. to ISO 9141-2, ISO 14230-4)
    • baud rate up to 56 kBaud/s
  • LAN:
    • M12 4-pin female connector
    • 10/100 Mbit LAN, D-coded
  • WLAN: 1× acc. to IEEE 802.11b,g,n,d,e,i up to 65 Mbit/s
  • Bluetooth (optional): 2.1+EDR, Power Class 1.5, BLE 4.0 and ANT
  • USB: USB 2.0 IF Connector, Typ A
  • 14-segment Display: Boot-information, K-/L-line mode, RS-mode, measurement, error codes
  • LEDs:
    • LAN Status LED, green and yellow
    • Wi-Fi/Bluetooth Status LED, green and yellow
    • 4× CAN Status LED, green and yellow
    • RS232; K-/L-Line Status LED, green and yellow
  • Dimensions (l×w×h): 110 mm × 150 mm × 35 mm
  • Housing: Aluminium, Protection class IP65
  • Operating temperature: –40°C up to +60°C
  • Storage temperature: –40°C up to +85°C
  • Supply: via CAN 12 V – 24 V