CappRondo - High Speed Refrigerated Centrifuge

Operating with the maximum speed of 17.000 rpm (27.237 g), CAPPRondo refrigerated microcentrifuge offers multiple rotor options.

For standard 1.5mL and 2.0mL microtubes, the CAPPRondo high speed refrigerated centrifuge offers a 24- or 30-place rotor. Both rotors have an angle of 45 degrees, hole diameter of 11.1mm and can accommodate tubes up to 52mm in height.

For the 1.5mL and 2.0mL microfilter tubes, the refrigerated microcentrifuge provides an 18-place rotor, fitting tubes up to 65mm in height. Multiple further rotors are available for CAPPRondo high speed refrigerated centrifuge – see the chart below providing an overview of all rotor types available for this high speed refrigerated microcentrifuge.

CAPPRondo refrigerated centrifuge operates with temperatures ranging from -20°C to 40°C. It cools down the samples to the temperature of 4°C in just 5 minutes.  The chamber of CAPPRondo high speed refrigerated centrifuge is rust-free and Teflon-coated.
The compressor-off function prevents from unnecessary cooling and frosting while the lid is open.

CAPPRondo refrigerated microcentrifuge provides quiet and stable operation, keeping the noise level at only 56 dB.
The parameters can be changed upon operation unless the Key Lock Function is activated.

CR-17-24
Fixed angle rotor of CAPPRondo refrigerated centrifuge
Capacity:  24 x 1.5mL/ 2.0mL microtubes
45°, Hole diameter 11.1mm, Max. height for tube fit 52mm
Supplied with O-ring sealed

CR-17-30
Fixed angle rotor of CAPPRondo refrigerated centrifuge
Capacity: 30 x 1.5mL 2.0mL microtubes
45°, Hole diameter 11.1mm, Max. height for tube fit 52mm
Supplied with O-ring sealed

CR-17-18
Fixed angle rotor of CAPPRondo refrigerated centrifuge
Capacity: 18 x 1.5mL/ 2.0mL microfilter tubes
45°, Hole diameter 11.1mm, Max. height for tube fit 65mm
Supplied with O-ring sealed

CR-17-5
Fixed angle rotor of CAPPRondo refrigerated centrifuge
Capacity: 12 x 5mL screw and snap cap microtubes
45°, Hole diameter 17mm, Max. height for tube fit 64mm
Supplied with O-ring sealed

CR-17-PCR
Fixed angle PCR-tube rotor of CAPPRondo refrigerated centrifuge
Capacity: 64 x 0.2mL PCR tubes or 8 rows of PCR strips
45°, Hole diameter 6.5mm, Max. height for tube fit 16mm

CR-17-D8
Drum Rotor of CAPPRondo refrigerated centrifuge
Capacity: 8 x 1.5mL/ 2.0mL microtubes (buckets are not included)
90°, Hole diameter 11.1mm, Max. height for tube fit 50mm

CR-17-D16
Drum Rotor of CAPPRondo refrigerated centrifuge
Capacity: 16 x 1.5mL/ 2.0mL microtubes (buckets are not included)
90°, Hole diameter 11.1mm, Max. height for tube fit 43mm

CR-1730R: CAPPRondo refrigerated microcentrifuge 17.000rpm/ 27.237g, 220V
CR-1730R-110: CAPPRondo refrigerated microcentrifuge 17.000rpm/ 27.237g, 110V
CR-17-24: Fixed angle rotor of 1730R for 24 x 1.5mL/2.0mL microtubes
CR-17-30: Fixed angle rotor of 1730R for 30 x 1.5mL/2.0mL microtubes
CR-17-18: Fixed angle rotor of 1730R for 18 x 1.5mL/ 2.0mL microfilter tubes
CR-17-5: Fixed angle rotor of 1730R for 12 x 5mL screw and snap cap microtubes
CR-17-PCR: Fixed angle PCR-tube Rotor of 1730R for 64 x 0.2mL PCR tubes or 8 rows of PCR strips
CR-17-D8: Drum Rotor of 1730R for 8 x 1.5mL/ 2.0mL microtubes (buckets are not included)
CR-17-D16: Drum Rotor of 1730R for 16 x 1.5mL/ 2.0mL microtubes (buckets are not included)
CR-17-B8: Single tube bucket Drum Rotor CR-17-D8 (total 8 buckets are required)
CR-17-B16: 4-tube bucket Drum Rotor CR-17-D16 (total 4 buckets are required)
CR-17-02: 0.2 mL adaptor of microtube rotors
CR-17-05: 0.5 mL adaptor of microtube rotors