HORIBA Europe GmbH
- Home
- Companies
- HORIBA Europe GmbH
- Products
- HORIBA - Model HC-200F - Four-Wire ...
HORIBA - Model HC-200F -Four-Wire Analyzer
Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).
Most popular related searches
fluoride electrode
solenoid valve
ion monitoring
glass industry
electrical conductivity
water conditioning
water treatment
process water treatment
instrument valve
sample conditioning
- Model : HC-200F
- Combined sensor : Fluoride ion electrode 1009
- Measurement range :
- Concentration: 0 mg/L to 10000 mg/L (Display range: 0 mg/L to 11000 mg/L)
- The selectable range: 10000 ,5000 ,2000 ,1000 ,500 ,200 ,100 ,50 ,20.0 ,10.0 mg/L
- Temperature: 0°C to 100°C (Display range: -10°C to 110°C )
- Transmission output :
- Number of output: 2
- (The negative terminals for transmission outputs are internally connected at the same electric potential)
- Output type: 4 mA to 20 mA DC: input/output isolated type
- Load resistance: Maximum: 900 Ω
- Contact output :
- Number of output: 3
- Output type: No-voltage contact output
- Contact type: Relay contact; SPDT (1c)
- Output capacity: 250 VAC 3 A, 30 VDC 3 A (resistance load)
- Cleaning output:
- Number of output: 1
- Output type: AC power control output ( Applied power supply voltage)
- Contact type: Relay contact; SPST (1a)
- Output contact capacity: 250 VAC 3 A, 30 VDC 3 A (resistance load)
- External instrument: Solenoid valve for cleaning control
- Contact input :
- Number of inputs: 1
- Contact type: No-voltage "a" contact for open collector
- Communication function :
- Communication type: RS-485
- Signal type:
- 2 wire system, isolated from the input circuit
- Not isolated from transmission circuit
- Temperature compensation : Applicable temperature element: Platinum resistor: 1kΩ (0°C), Positive relation resistor with temperature: 10kΩ(25°C), Temperature compensation range: 0 °C to 100°C
- Calibration : Number of calibration points: Selectable from 1, and 2 points
- Self-check: Calibration error, Electrode diagnostic error, Meter error.
- Operating temperature range : -20°C to 55°C (without freeze)
- Power supply : Power supply voltage range: 90 V to 264 VAC 50/60 Hz
- Power consumption: 15VA(max)
- Compatible standards : CE marking, FCC Rules
- Structure :
- Installation: Outdoor installation type
- Installation method: Mounted on 50A pole or wall
- Protection code: IP65 IEC60529, JIS C0920
- Case material: Aluminum alloy (coated with epoxy-denatured melamine resin)
- External dimensions : 180 (W) x 155 (H) x 115 (D) mm (excluding the fittings)
- Mass : Main body: Approx. 3.5 kg; cover and fittings: Approx. 1 kg
- Product name : Fluoride ion electrode
- Model : 1009
- Sample water conditions :
- pH range:
- 4 to 8 pH (at 0.2 mg/L)
- 4 to 10 pH (at 20 mg/L)
- 4 to 12 pH (at 2000 mg/L)
- Temperature range: 0 to 40°C
- Electric conductivity: Over 500 μS/cm
- Flow rate range: 1 to 20 cm/sec.
- Electrode structure :
- Structure: Submergible type
- Response film: Lanthanum fluoride
- Comparative electrode: Ag/AgCl, Internal solution, KCL 3.3 mol/L, Replenishment type
- Liquid junction: Ceramic double junction
- Temperature compensation element: Pt1000Ω (0°C)
- cable length: 5 m
- External dimensions : 12Φ × 175 (L) mm(cable and projection excluded)
- Mass : Approx. 200g