Companies
Products
Polypipe - Model RabbitCoater - ...

Horizon - Model 6 -Compact Routine Centrifuge

FromDrucker Diagnostics

SHARE

The HORIZON 6 routine centrifuge makes it easier than ever to process blood and urine specimens. Its six-tube capacity and small footprint make it ideal for labs and point of care facilities where repeatability is key. Use the simple, two-button interface to program your validated cycles, or set and lock to one of three (3) preset cycles based on recommendations by tube manufacturers and the CLSI. Bright LED lid lighting is off when the centrifuge is ready to load, on when running, and flashing at the end of cycle. Horizontal and fixed angle models available.

Most popular related searches

safety regulations

canadian safety regulations

sample separation

sample processing

process monitoring

Capacity: 6 x 75-100 mm (3-10 mL)
Max RCF: 2,000 xg
Max RPM: 3,800 RPM
Weight: 12 lbs (5.4 kg)
Dimensions: 12 x 14 x 9 in (30 x 36 x 23 cm)
Warranty: 2 years (lifetime on rotor)

3 cycles preset for routine lab needs
Set and lock controls to one setting
LED lid lighting indicates cycle status
Designed, built, and supported in the USA

Easy to Use

Use the simple, two-button interface to select a preset, or program and record your validated settings on the included label. Process 75-100 mm (3-10 mL) tubes in the same holder.

Easy to Monitor

Process samples more efficiently. HORIZON`s LED lid lighting is off when the centrifuge is ready to load, on when running, and flashing at the end of each cycle.

Engineered for Safety Protect your lab with imbalance detection and a shatterproof lid which can only be opened when the centrifuge`s rotor is stopped, even if the unit loses power

Capacity – Up to six (6) tubes
Tube Sizes – Up to 75-100 mm (3-10 mL)
Factory Presets – Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU
Set and Lock Controls – The two-button interface allows users to select a cycle, or lock to a single cycle with the press of a button
Intuitive Lid Lighting – No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
Brushless DC Motor – Years of operation with no routine maintenance
Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
Reinforced Guard Bowl – Provides maximum safety and durability
Quiet Operation – Enjoy a sound level of just 64 dBA
Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards

Height - 9 in. (23 cm)
Width - 12 in. (30 cm)
Depth - 14 in. (36 cm)
Weight - 12 lbs. (5.4 kg)
Sound Level - 64 dBA
Max. Acceleration Time - 20 Seconds
Max. Deceleration Time - 20 Seconds
Factory Setting Range- 1 to 30 Minutes (± 1%)
Voltage - 95 to 253 VAC
Frequency - 50/60 Hz
Max. Power Requirements - 220 Watts
Centrifuge Motor - 1/2 H.P. Brushless DC
Max Speed - 3,800 RPM
Preset Speeds
- 3,600 RPM with Chemistry Preset Cycle
- 3,300 RPM with Coag - PPP Preset Cycle
- 1,900 RPM with Urine Preset Cycle