- Home
- Equipment
Refine by
Binmaster Environmental Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1/4”Ø Galvanized shaft extension, includes paddle ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Mini-Rotary insertable bayonet polycarbonate paddle, turns in a 5” diameter for 6 mm ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter Galvanized shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' 115 VAC Power Pac delivers flexible, dependable point-level detection by allowing the electronics to be mounted remotely—up to 25 feet from the sensing probe. Powered by 115 VAC, it ensures reliable performance across bulk solids, powders, liquids, and slurries. Featuring intuitive “Quick-Set” calibration, adjustable time delay, and PRO-Shield ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
FD2000 - Microwave flow / no flow monitor in IP 64 enclosure, 24 VDC, unlisted. Flow Detect 2000 is a flow sensor to detect dry solids flow in any processing ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
1/4” SS NPT female coupler to attach paddle to shaft extensions or shaft extensions ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D acoustic level sensor RL - standard with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 15º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for Class I, II, Division 1, ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - S with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 30º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for Class I, II, Division 1, Groups C, D, E, F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter stainless steel shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - S with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 30º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The VRX21 vibrating probe level sensor is the newest iteration of BinMaster’s standard vibrating rod, now including a bright, built-in LED status indicator. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BM-T - Tilt switch for high level limit switch applications. Must order shaft with paddle or sphere ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO AUTO-CAL 230 Power Pac delivers simple, reliable point-level detection with the convenience of automatic calibration. Operating on 230 VAC, it uses a magnetic trigger so setup and testing can be completed in minutes without removing the cover. Designed for precision, it offers sensitivity down to 0.5 pF and an adjustable time delay of up to 10 seconds to virtually eliminate ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6”x 1” Diameter stainless steel shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Tilt switch with ATEX approvals for high-level limit switch application for stationary mounting. Certified for Class II Groups E, F, and ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-I-110 - Mini-Rotary 110 VAC with single-vane, stainless steel rectangular paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-C - Pre-configured vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...