- Home
- Companies
- hyCLEANER GmbH & Co. KG
- Products
- hyCLEANER - Model facadeBRUSH v-line - ...
hyCLEANER - Model facadeBRUSH v-line -Efficient Façade Cleaning Robots
The facadeBRUSH v-line cleans various facade shapes with a wide variety of surfaces and materials gently, effectively, quickly and, above all, economically due to its area performance. The 1.55-meter mechanical brush can be configured with different attachment options so that it can be used on various gondola and access systems as well as working platforms. Cleaning takes place in a vertical direction from top to bottom. It works only with high-pressure water and does not require any power supply lines for the drive. Not only the glass but also the frames of the facade can be cleaned in a single operation.
The water-bearing elements are all made of stainless materials, so that the use of osmosis water has also been taken into account. Thus, the glass surfaces dry after cleaning without leaving streaks on the surfaces of the facades - simply clean gently.
500 sqm/h cleaning capacity
A maximum of 50 sqm/h of facade can be cleaned by hand under continuous load. With the facadeBRUSH v-line this can be done ten times faster.
Efficient cleaning for time & cost savings
Thanks to a cleaning width of 1550 mm, facades can be cleaned economically, quickly and gently with just one worker, without any physical strain on the operator. The high cleaning quality also ensures reduced cleaning intervals.
Flexible use
You can use our façade cleaning robot flexibly on different façades: whether glass, metal or mixed façades. The machine is used vertically so that it cleans from top to bottom.
With low maintenance to a property that retains its value
Not only is our cleaning system low maintenance and service-friendly. Cleaning and cleanliness also increase the value of real estate. In this way, permanent damage can be proactively avoided.
Different mounting options
The type of attachment can be configured flexibly. Thus, the machine can be attached to different nacelle and travel systems. When used with a working platform, the brush can be attached to the working cage or directly to the platform. The cleaning machine is already approved for a wide range of working platforms.
Chemical-free for the best cleaning result
The special brush design with its high rotation ensures a slight compaction of the surface. This can bring about a desired polishing effect. This makes the surface smoother and slows down subsequent soiling.
Machine
- Brush width : +/- 1550 mm
- Brush diameter : +/- 550 mm
- Movement compensation : max. 1000 mm
- Impeller ∅ large : 500 mm
- Impeller ∅ small : 260 mm
- Total weight : min. 120 kg
- Traffic load on the surface to be cleaned
- min. 20 kp/m2
- max. 82 kp/m2
- min 197 N/m2
- max 807 N/m2
Drive
- Water pressure :
- min. 120 bar
- max. 160 bar
- Water quantity :
- min. 9l / min
- max. 12l / min
- Speed adjustable via water pressure : Yes
- Lowering speed : max. 24 m / min
- Area output* : *dependent oncontamination : max. 9m2 / min.