- Home
- Companies
- Rowse Hydraulic Rakes Company, Inc.
- Products
- Rowse - Model 300 - Hydraulic Scraper
Rowse - Model 300 -Hydraulic Scraper
The Rowse Model 300 Hydraulic Scraper is designed for loading with smaller horsepower tractors but built tough for use with larger tractors, too. The scraper`s 8` wide cutting edge is wider than its wheels, and when teamed with a single rear wheeled tractor, it lets you cut or fill close to existing structures or fences. The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double-acting hydraulic cylinders with 1½" chrome shafts position the scraper for loading, carrying and dumping. The 300 Model is available with two front wheels and other options.
The versatility of Rowse Scrapers allows you to move dirt, level land, dig holes, clear areas and drain or fill low spots. The complete operation is controlled by one single-spool, double-acting hydraulic control valve.
- Heavy-duty rectangular steel tubing frames
- 2¼" main hinge pivots
- 3-piece frost blade
- Removable and reversible 8' cutting blades
The Rowse Model 500 and Model 700 Scrapers are designed for use with two or four-wheel drive tractors. Both have a gooseneck hitch to allow 90° turns for easy maneuverability.
- Rowse Scrapers feature heavy-duty rectangular steel tubing frames for strength and stability.
- The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double acting hydraulic cylinders with chrome shafts (2" Model 500, 2" Model 700) position the scraper bucket. A depth gauge is standard on the 500 and 700 models.
- A 3-piece frost blade attaches to a double reinforced bucket edge for maximum strength. The 8' cutting blades are removable on the 5 and 7 yard models, reversible and made with road grader-type steel. With fingertip operation from your tractor seat, the precise hydraulic control gives you an adjustable load or spread depth from 4"-12".
- The 500, 700, XL500, and XL700 scrapers are protected by a shear pin in the tongue should it strike an immovable object. All Rowse Scrapers are equipped with transport stops for safe transporting behind a pickup at highway speeds.
Model 3002 • Model 3004
- Capacity, heaped: 3 cubic yards (approx.)
- Width of cut: 95 3/4"
- Overall width: 111"
- Box Width (front to rear gate): 43"
- HP Requirements: 50 and up
- Weight: Approx. 2000 lbs.
- Hydraulic Requirements: One double-acting control valve
- Blade: Removable, high carbon steel (3-piece carbon steel frost blade)
- Tires: 95L x 15, 6-ply included with scraper
Model 5002 • Model 5004
- Capacity, heaped: 5 cubic yards (approx.)
- Width of cut: 95 3/4"
- Overall width: 113"
- Box width (front to rear gate): 48"
- HP requirements: 70 and up
- Front dump spreading depth: 4"-12"
- Weight: Approx. 4000 lbs.
- Hydraulic Requirements: One double-acting control valve
- Blade: Removable, reversible, 3-piece pacal steel (8" wide frost blade)
Model 7002 • Model 7004
- Capacity, heaped: 7 cubic yards (approx.)
- Width of cut: 95 3/4"
- Overall width: 113"
- Box width (front to rear gate): 48"
- HP requirements: 85 and up
- Front dump spreading depth: 4"-12"
- Weight: Approx. 5000 lbs.
- Hydraulic requirements: One double-acting control valve
- Blade: Removable, reversible, 3-piece high carbon steel (8" wide frost blade)
- Tires: (50 psi) 12.5 L x 16, 12-ply or 14-ply