IMR - Model MGS-550 -Refrigerant / Gas Detector
The MGS-550 can easily be connected to any central BMS control system (via Modbus connection) or, with its three onboard user-assignable relays, can easily function as a stand-alone unit without the need to wire alarm devices back to a central system. Providing the ultimate in flexibility, the instrument can be upgraded at any time from a one-sensor unit to a two-sensor system by simply installing another sensor. Both analog outputs can be assigned as either redundant or specific for each of the sensors. The simple, single level menu interface throughout the MGS-550 platform significantly reduces the amount of training required for maintenance and installation.
The new gas detector / gas transmitter MGS-550 is a flexible-platform instrument that is easily customized for a wide variety of challenging applications.
The advanced MGS-550 gas detector series is user-configurable and can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. It can detect an extensive range of refrigerants, combustible and toxic gases.
- Flexible One or Two-Sensor Capability
- Remote Sensor Options for Direct Monitoring in Any Environment
- Analog and Modbus Interface
- Three User-Assignable Relays for Enhanced Safety
- Magnetic Wand Enables Easy, Non-Intrusive Adjustments/Calibration
- 3 Status Indicators and 5-Digit Numeric LED Display
Following is a list of gases (excerpt) that can be detected:
- R22 0 - 1000 ppm or 0 - 10000 ppm
- R32 0 - 1000 ppm or 0 - 10000 ppm
- R134a 0 - 1000 ppm or 0 - 10000 ppm
- R404a 0 - 1000 ppm or 0 - 10000 ppm
- R407a 0 - 1000 ppm or 0 - 10000 ppm
- R407c 0 - 1000 ppm or 0 - 10000 ppm
- R407f 0 - 1000 ppm or 0 - 10000 ppm
- R410a 0 - 1000 ppm or 0 - 10000 ppm
- R422 0 - 1000 ppm or 0 - 10000 ppm
- R422d 0 - 1000 ppm or 0 - 10000 ppm
- R427a 0 - 1000 ppm
- R448a 0 - 1000 ppm
- R449a 0 - 1000 ppm
- R452a 0 - 1000 ppm
- R507 0 - 1000 ppm or 0 - 10000 ppm
- R513a 0 - 1000 ppm
- HFO1234YF 0 - 1000 ppm
- HFO1234ZE 0 - 1000 ppm or 0 - 10000 ppm
- NH3 Ammonia 0 - 100 ppm or 0 - 1000 ppm or 0 - 5000 ppm or 0 - 10000 ppm or 0 - 100 % LEL
- R290 0 - 5000 ppm
- R600 0 - 5000 ppm
- CH4 Methane 0 - 5000 ppm or 0 - 100 % LEL
- C2H4 Ethylene 0 - 2000 ppm
- CO2 Carbon Dioxide 0 - 5000 ppm or 0 - 10000 ppm or 0 - 20000 ppm or 0 - 30000 ppm or 0 - 40000 ppm or 0 - 50000 ppm
- C4H10 Butane 0 - 100 % LEL
- C3H8 Propane 0 - 100 % LEL
- CO Carbon Monoxide 0 - 1000 ppm
- O2 Oxygen 0 - 30 Vol. %
- LPG 0 - 100 % LEL
- NO2 Nitrogen Dioxide 0 - 20 ppm
- Sensor: Semiconductor, Electrochemical, Infrared or Catalytic Bead sensor
- Number of Sensors:1 or 2
- Type of Sensors:Remote or integrated into the enclosure
- Type of Enclosure:Standard: IP66; ABS; 4 x M20x1.5 ports
- Power Supply:19.5 - 28.5 VDC or 24VAC +/- 20%; 3 or 4 wire
- Display: 5-digit, 7-segment red LED and green status LEDs
- Analog Output:4 - 20mA / 0 - 5 V / 0 - 10 V / 1 - 5 V / 2 - 10 V
- Digital Output:MODBUS RTU via RS485
- Relay: 3 relays; SPDT; user assignable
- Rating: 1A @ 24VDC; 0.25A @ 240VAC; resistive load
- Alarm delay:0 - 15 minutes; user programmable
- Temperature Range:-40°C to +50°C
- Humidity Range:5-90 % rh, non condensing
- Altitude:up to 3050m
- Dimensions:Standard: 210 x 225 x 85 mm
- Weight: Standard: 1 kg
- IMR Environmental Equipment, Inc. reserves the right to adopt technical modifications without prior notice.
Included :
- Gas Detector MGS-550
- Manual