Chemguard - Model CE95 -In-Line Eductor
The Chemguard CE95 is an in-line eductor designed for fire suppression systems. It operates with a pressure loss of approximately 35% of the inlet pressure and is capable of proportioning foam at rates of 0.5%, 1%, 3%, and 6%. With a flow rate of 95 GPM (360 liters per minute), the CE95 models are constructed from brass and are available with different thread specifications: 1.5” NST and 1.5” NPSH. Weighing 10 lbs (4.5 kg), the CE95 is designed for robust and reliable operation. Additional accessories for the CE95 include the CE95T pick-up tube, MV60 metering valve for 60 GPM eductors, MV95 metering valve for 95 GPM eductors, and the PTE pick-up hose and tube with clamps. This equipment is primarily used in firefighting applications where precise foam proportioning is required to efficiently suppress fires.
- Corrosion Resistant Brass Construction
- 1-1/2” swivel inlet X 1-1/2”male outlet
- Eductor rated for optimum flow at 200 PSI (14 Bar)
- Furnished with 30”(76cm) pick up tube
- Variable metering valve
- Removable metering valve
- A large, easy to read metering dial
- Ball check valve prevents back flow into foam concentrate
- Must be used with a nozzle of equivalent flow rate
- Maximum hose lay between eductor and nozzle on level ground using 1½"(3.8 cm) hose is 150 ft.(46m)
- Maximum hose lay between eductor and nozzle on level ground using 2"(5 cm) hose is 300 ft.(91m)
- Normal inlet operating pressure at eductor is 200 psi; however, the eductor can be used at lower inlet pressures with a corresponding reduction in flow rates