InnoSepra - Carbon Dioxide Capture Technology
The InnoSepra carbon dioxide capture technology can capture carbon dioxide from a number of sources including coal and natural gas based power plants. The innovative technology based on physical sorbents results in more than 40% reduction in capital and operating cost and can make carbon capture viable for a number of applications. In a DOE funded project the technology has been successfully demonstrated in a coal-fired power plant at one ton per day scale. The projected CO2 capture cost of less than $40/ton is very attractive for Enhanced Oil Recovery (EOR) applications. The technology development has been primarily funded by US Department of Energy and with additional funding from NJEDA, InnoSepra, and several strategic partners.
InnoSepra’s Post Combustion Technologies are based on physical sorbents that have much lower regeneration energy requirement compared to reaction based solvent and sorbent systems. These materials are also low cost and very stable. Through a combination of materials and process, InnoSepra has been able to develop lower cost carbon capture solutions. Unlike membrane and absorption based technologies, the InnoSepra technology produces pipeline quality carbon dioxide.
Acid gas impurities such as SOx and NO2 in flue gas can have a significant detrimental impact on solvent based capture technologies. InnoSepra’s flue gas purification technology can remove SOx and NO2 to sub-ppm levels while removing a significant amount of aerosols from the flue gas. This technology has been successfully tested at 500-scfm scale at a coal fired power plant and can greatly benefit any capture technology, particularly those based on reactive solvents.
For any capture technology a significant amount of energy and capital is needed to bring captured CO2 to the pipeline pressure. InnoSepra has developed a CO2 capture and liquefaction cycle that can reduce the CO2 compression cost and energy requirement cost compared to current CO2 compression technologies by more than 20%.
While CO2 capture has been recognized as one of the key technologies to mitigate the adverse impacts of global warming, there are very few places around the world that provide financial incentives for CO2 capture. One of the few incentives include 45Q tax credits in the United States. The 45Q addresses two specific markets.
Enhanced Oil Recovery
Capture of carbon dioxide from flue gases, oil gas operations and various industrial sources and using it for enhanced oil recovery has a lower carbon footprint than producing oil without the use of carbon dioxide. This application can potentially use all the carbon emissions from 30 MW of coal-based power generation for over 30 years. Additionally more than 70% of injected carbon dioxide is stored in the oilfields. The use of captured CO2 for oil recovery can provide a very economical and environmentally responsible solution for oil production and can prevent a significant amount of CO2 from being emitted into the atmosphere. The 45Q provides a tax credit incentive of up to $35/ton for utilizing captured carbon dioxide for enhanced oil recovery. Read more »
Carbon Dioxide Sequestration
In addition to utilizing carbon dioxide for enhanced oil recovery, the captured carbon dioxide can also be injected into suitable geologic formations for long term storage. The 45Q provides a tax credit incentive of up to $50/ton for utilizing captured carbon dioxide for long term geologic sequestration.