InPro - Model 8300 - RAMS Series for Optical Product Monitor
The InPro 8300 RAMS (Reflection Absorption Multi-Switch) systems are designed for in-line use in phase separation and product identification applications by turbidity or color. The rugged InPro 8300 RAMS systems are simple to configure, easy to use and require minimal maintenance. These systems are widely used in brewery applications for beer/water separation, before the filler line and in separator control. For product identification, a “fingerprint” of each product is taken and stored in the InPro 8300 RAMS’ built-in memory. Fingerprinting is done using one or more parameters (e.g. blue transmittance, NIR reflection or green absorption). The InPro 8300 RAMS identifies up to eight different products.
Specifications - InPro 8300 RAMS Series for Optical Product Monitor
Measuring cycle (all 8 parameters): approx. 5 measurements per second
Span: 400…2000 RAMS units
Power consumption: <50 mA plus total of output currents, polarityreversal protection up to 30 V
Parameter setting interface: RS-232
Operating pressure: max. 10 bar
Ambient temperature: 0…40 °C
Product temperature: 0…105 °C (140 °C as an option)
Rel. humidity: 0…100%
Protection class: IP 67
Optics housing: 1.4404
Viewing window: PVC
Housing material: 1.4404
Sealing material: EPDM, alternatively FKM
Repeatability: ± 1 % of measuring range
Power supply: 24 V DC ± 5%
Temperature compensation: 0…50 °C in steps of 0.1 °C>50 °C in steps of 0.5 °C
Features and Benefits
How it Works
The InPro 8300 RAMS (Reflection Absorption Multi-Switch) measures reflection and absorption of the process medium in the pipe at four wavelengths (blue, green, red, near-infrared). Measurement of both turbidity and color is possible.
The InPro 8300 RAMS is fitted into the product pipe using a standard VARINLINE™ housing. The housing ensures both easy installation of the sensor and optimal cleaning characteristics for CIP/SIP processes.
A software package is available for product identification, FTU/EBC calibration, storing of readings and for parameterization.
Each sensor is delivered factory calibrated based on a multi-point calibration. This means no on-site calibration is necessary.