Integrated - Model Sherlock -Two-Finger Roll Scanner

OS Support & System Requirements

OS Support

Windows Desktop Editions 7, 8, 10, 11
Linux Kernel 4.0 or newer (32/64 bit, ARMv6, ARMv7)

• Ubuntu 18.04, 20.04 or newer
• Debian 10, 11, or newer

Android 10, 11, 12

CPU

x86 and x64 | 2.0GHz or higher ARM | 1.0 GHz or higher

Memory

512MB or higher

Images & Capture

Sensor Type

LES

Camera

TFT

Resolution

500 ppi

Grayscale

256 grayscale dynamic range

Image Size

800 x 750 pixels

Supported Image Formats

RAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)

Encryption

N/A

FBI / Image Certifications

Mobile ID IQS FAP 45, PIV, GSA FIPS 201, FBI Appendix F

Speed

Min frame rate > 10fps

API Interface

Capture single finger direct/rolls, multi-device/muti-thread support

Quality Scoring

NFIQ v1 supported on all OSes and NFIQ2 for Windows

Weight & Dimensions

Product Weight

< 55 grams / 0.12 lbs

Platen Size

42 mm x 39 mm / 1.65” x 1.53”

Sensing Area

40 mm x 38 mm / 1.6” x 1.5”

Scanner Assembly Dimensions

65.2 mm x 59.5 mm x 14.2 mm / 2.57″ x 2.34” x 0.56”

Power & Connectors

Interface

USB 2.0

Power Source

USB Host

USB Voltage Level

4.75V to 5.25V

Conformance & Certifications

USB Certification

USB-IF USB.ORG

FCC/CE Conformance

FCC Part 15 (per ANSI C62.4:2003) Class A, CSA ICES-003 Class A, CE Emissions:EN55022:2006 Class A, CE Immunity EN 55024:1998/A1:2001/A2:2003, IEC61000-4-2

Air Discharge / Contact Discharge

In compliance with IEC 61000-4-2

Equipment Safety

IEC 62368-1

Hazardous Material

RoHS Directive 2002/95/EC
TSCA*
Proposition 65*
Canada Prohibition*
*Compliant on SH21100-000

Vibration Test

Per Mil-STD-810F (Method 514.5), Category 24, Flg.514.5C-17

Compliance/Certifications

• Fingerprint Template Output Formats
  • ISO_19794_2_2005/2011, ISO_19794_4_2005/2011
  • ANSI_INCITS_378_2004/ANSI_INCITS_381_2004
• 500 PPI fingerprint capture supporting rolls and flats
• ISO 9001:2015
• iBeta ISO 30107-3 Compliant
• MOSIP L1 Compliant

Temperature & Humidity

Operating Temperature

-10°C ~ +55°C / 14°F ~ 131°F

Humidity

30~85% RH < 40°C / 104°F (Non-condensing)

Storage Temperature

-40°C ~ +80°C / -40°F ~ 176°F

Surface & Systems

Ingress Protection / Water / Dust

IP65 Sealed bezel to scanning surface

Surface Durability

MIL-C-675c 4.5010, MIL-STD-810F

Cleaning & Sanitization

For proper cleaning and disinfection of IB products, visit
/cleaning

Mean-Time Between Failures (MTBF)

Based on 200 full two-finger enrollments per day, the Sherlock MTBF is 33 years.

Compliance & Regulations

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by Integrated Biometrics could void the user’s authority to operate this equipment legally under FCC regulations.