- Home
- Companies
- Intersurface Dynamics, Inc.
- Products
- Intersurface Dynamics Mercury - Model ...
Intersurface Dynamics Mercury - Model 1000 -Synthetic Grinding Fluid
MERCURY 1000 is a synthetic formulation developed to optimize removal rate and surface finish in grinding, sawing, and dicing processes using fixed abrasive grinding wheels and blades. The product’s exceptional heat transfer characteristics insure prolonged wheel life, even with the most difficult materials. MERCURY 1000 is compatible with all filtration systems, and its foam-free operation promotes operator acceptance.
MERCURY 1000 is designed for use at economical dilution ratios and is equally effective in hard and soft water. For optimum results, follow the dilution ratios listed below, making production specific adjustments as needed:
Application: Dilution Ratio
- Surface/Blanchard: 30-50:1
- O.D./Cylindrical: 30-50:1
- Edge/Bevel/Dicing: 50-75:1
Maintaining dilution ratios with a hand-held refractometer is recommended. A pH meter is also useful. Develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use. Maintain a higher concentration for recirculating, filtered coolant systems.
Mercury products are available in 5-gallon pails and 55-gallon drums, F.O.B. Bethel, Connecticut, and also include: suspension additives for lapping/polishing slurries, rinse/wet storage additives, and ultrasonic/megasonic detergents. Material Safety Data Sheets available upon request.
- Better surface finishes
- Faster removal rates
- No foam
- Extended diamond life
- Non-staining
- Compatible with all filtration systems
- Non-corrosive
- Operator acceptance