- Home
- Companies
- East Midlands Water Company (Aqua Euro)
- Products
- AquaEuro - Model 56lpm - Iron and ...
AquaEuro - Model 56lpm -Iron and Manganese Removal System
Whole House Iron and Manganese Removal System. Will treat a Property with flow rates Up to 56LPM. Economical Iron & Hydrogen Sulfide Filtration Media that out performs most traditional media. No Oxidizing Chemicals Required. Effective from 5PH - 9 pH.
The system has been designed to easily treat you iron an manganese problem. The System will require a backwash on a daily basis in order that the treatment process remains effective.
- Height 1625mm Approx
- Diameter 330mm Approx
- Connections 1 " BSP Inlet, Outlet
- Drain pre Connected 3/4 hose
- Max Flow Rate 56 lpm
- Minimum Flow rate for backwash 47lpm
- PH Range 5-9
- ORP >negative 170 Millivolts
- Removal Rates
- Iron 15.00 PPM (15000 ug/l)
- Hydrogen Sulfide 7 PPM (7000ug/l)
- Manganese 3 PPM (3000 ug/l)
This media is suitable for use in most water conditions ORP Level must be above negative 170 millivolts, for conditions above 170 millivolts an additional oxidant may be required.
We strongly advise that if you are in any doubt regarding the suitability of this product, that you obtain a full water analysis and seek advice from one of our technical staff before going ahead with your purchase.
This system is designed only for the removal Iron, Manganese & Hydrogen Sulfide. Please seek advice from our technical team if you have other contaminants in your water supply that may be either harmful or effect the operation of this system.
Installing your softener - plumber or DIY? Every softener comes complete with fitting instructions and water test kit, allowing for installation by a plumber or DIY enthusiast
- Connections Inlet/Outlet 3/4" Bsp male parallel
- Overflow 1/2" Hose connector
- Drain 1/2" O.D tubing
- Transformer-13amp/ 12V
- Operating Parameters: Max operating Pressure 8 bar (116 p.s.i )
- Min Operating Pressure 1 bar (14.5 p.s.i )
- Max water temperature 30 degree C
- Min water temperature Protect from freezing
- Total Dimensions H 640 x W 275 x D 500 (mm)
- Resin Capacity 10Ltr Softener Capacity 1650ltr @ 300ppm
- Salt use per Regen 1.1 Kg
- Flow rates 15mm Fittings 30ltr Per Min
- Combi Fittings 45ltr Per Min
- 22mm Fittings 75ltr per mi
To choose your fitting kit for this softener please click on add to order below for the 3 fitting kit options.