Jet-Oxide - 15% Industrial Sanitizer

USE ON INDUSTRIAL HARD SURFACES FOR HUMAN CORONAVIRUS:
The EPA approved using Jet-Oxide 15% on industrial hard surfaces for Human Coronavirus and recommends using Jet-Oxide 15% at 1300 ppm (or 0.13% concentration) of active ingredient – which is about one fluid ounce of Jet Oxide 15% mixed in one gallon of water, with at least one minute of exposure. Marrone Bio Innovations also recommends the use of a foamer.

EPA approval and recommendation can be found at the following link: www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2. Jet-Oxide 15% (EPA # 54289-4-81803) is a supplemental registration of PERACLEAN® 15 (EPA #54289-4).

ORGANIC:
Jet-Oxide® 15% has WSDA certification and has been verified to comply with the USDA National Organic Standards.

As the product biodegrades, all compounds used in Jet-Oxide 15% are environmentally friendly.

USES:
Institutional/Industrial Sanitizing of Previously Cleaned Non-Porous Food Contact Surfaces in:
Dairies, Wineries, Breweries, Food and Beverage Plants, Disinfecting Poultry Premises, Poultry Hatcheries, Animal Housing Facilities, Reverse Osmosis Membranes and Ultra Filtration

Hard Surface Disinfection in:
Hospitals, Health Care Facilities, Schools, Colleges, Veterinary Clinics, Animal Life Science Laboratories, Industrial Facilities, Office Buildings, Recreational Facilities, Retail and Wholesale Establishments

Bacteria, Fungi, and Slime Control in:
Pulp and Paper Mill Systems, Dispersed Pigments, Cooling Water Systems, Coatings Preservation

APPLICATION:

• Fresh sanitizing solutions should be prepared at least daily. Prepared solution may not be used for subsequent sanitizing.
• Recommended use on pre-cleaned surfaces.
• Effective as a sanitizer when solution is prepared in water of up to 400 ppm hardness as a CACO3. This product has demonstrated greater than a 99.999% reduction of survivors after a 30-second exposure period in the AOAC Germicidal and Detergent Sanitizing Action of Disinfectants study.
• ALWAYS READ AND FOLLOW LABEL INSTRUCTIONS.

ACTIVE INGREDIENTS:
Hydrogen Peroxide 22.0%
Peroxyacetic Acid 15.0%

Discover the Advantages of Jet-Oxide® 15% Industrial Sanitizer Over Chlorine

• Easier to use because there is no mixing for pH control
• Jet-Oxide breaks down carbon dioxide, oxygen, and water
• Chlorine has many carcinogenic formations upon breakdown and is not as environmentally safe
• Jet-Oxide is not corrosive to stainless steel
• Jet-Oxide aids in reducing or not aiding mineral scale formation
• Jet-Oxide efficacy increases in hot water, is an effective biofilm remover and degrades to carbon, oxygen, water
• 4. Chlorine requires an additional rinse while Jet-Oxide does not, helping to conserve water and reduce labor