- Home
- Companies
- McWane Ductile - A Division of McWane, ...
- Products
- McWane - Model MJ/TJ - Joint Pipe
McWane - Model MJ/TJ -Joint Pipe
The Mechanical with Tyton Joint pipe combines the ease of connecting fittings and valves with the simple, reliable, and proven Tyton Joint gasket sealing system. Available in sizes 6` through 24`, this dual purpose ductile iron product could be used in both push on and restrained applications.
Mechanical with TYTON JOINT® Pipe Assembly
Step 1. Thoroughly clean out the bell with special attention to the gasket recess. Remove any foreign material or excess paint. Clean the spigot or beveled plain end and remove any sharp edges with a standard fi le.
Step 2. After making sure that the correct gasket is being used, insert it into the recess in the bell with the small end of the gasket facing the bell face.
Step 3. Place the wedge type restraining devise on the plain end with the lip extension toward the plain end.
Step 4. Apply lubricant to the inside surface only of the gasket, making sure that the entire surface is coated. Apply a generous coating of lubricant to the beveled portion of the plain end. Guide the plain end into the bell and, while maintaining straight alignment, push the plain end into the bell socket.
Step 5. Insert and start the nuts on the T-head bolts.
Step 6. Defl ect the joint to the desired alignment. When assembly is complete, the bell face should be aligned between the two white depth rings.
Step 7. Tighten the T-head bolts to fi nger tight.
Step 8. Tighten the wedge type restraining device to the manufactures recommended torque.