Komax - FRP Inline Static Mixers
Fiber glass static mixers or FRP Static Mixers are mostly found in the municipal water and wastewater treatment industry. Komax Systems designs FRP inline static mixers, FRP non-clogging static mixers and FRP wafer static mixers. The Komax custom design Fiberglass-reinforced plastic (FRP) Static Mixers are made by design sized from 1” to 12” they include the application required number of ASME B31.1 welded elements incased in or removable as an assembly in FRP housing with end connections to fit your process pipeline.
- Water & Sodium Hydroxide
- Sodium Hypochlorite
- Oily Sludge
- Polyelectrolyte
- Antiscalant
- Aq Chemicals
- 93% Sulfuric Acid
- Process Fluid
- Polymer
- Chlorine
Triple Action Mixing Elements
The Komax Triple Action Mixer provides the highest level of mixing of any static mixer by providing Two by Two Division, Cross Current/ Impingement mixing and Back mixing which produces very high mixing efficiency in a short lay length with low pressure losses.
Non-clogging (Hi-pass) Mixing Elements
Set of mixing elements placed on opposite side to allow wall-to-wall radial transfer of sludge and debris with no clogging or build up as it offers a wider opening in the center if the static mixer allowing bigger particles to pass through.
- Flanged Ends: Flanged end connections allow for easy mounting of the static mixer into the process pipeline. As a general standard, metal static mixers have raised face flanges per ASME B16.5 or ASME B16.47 (for sizes larger than 24”) standards. Komax can also fabricate mixers to contain DIN (metric) flanges as well.
- Threaded Ends: N/A
- Weld Prep Ends: N/A
- Injection Ports: An injection port or quill can be added to the static mixer to allow for an additive stream to be injected directly into the static mixer with desired connection type.
*All static mixers are custom made; end connection type can be made per customer request.
- Diameter: 1″ to 12″
- Material: Fiberglass-Reinforced Plastic
- Pipe Schedule: Schedule 10-40