Leman - Model HYDRO50 LS2 -High Flow, High Purity Hydrogen Generator

The device is composed of several independent modules (approx. 3 L/min by module) connected in parallel and controlled by an RS485 internal bus (cogeneration). In case of failure, each module can be switched off and removed from the device without interrupting the production of other modules.

The instrument could be alimented directly from a bi-distilled water distribution network (option).  

The produced Hydrogen is available 24/7 on demand with a constant purity of 99.9995% at output flows of 5, 10 & 15 NL/min. The H2 output pressure is regulated electronically and can be set from 0.5 to 10 bar.  

Each instrument is equipped with high-performance communication interfaces, such as USB and RS485 (Ethernet and WLAN as options), to create a very flexible gas network with local or central control.

Due to the software being focused on safety, automatic regulation, and intuitive and reliable communications, the HYDRO50LS2 High Flow High Purity Hydrogen Generators are easy to install, reliable, safe, and pleasant to operate.

• The device is composed of several independent modules (approx. 3 L/min by module) connected in parallel and controlled by an RS485 internal bus (cogeneration). In case of failure, each module can be switched off and removed from the device without interrupting the production of other modules.
• The instrument could be alimented directly from a bi-distilled water distribution network (option).  
• The produced Hydrogen is available 24/7 on demand with a constant purity of 99.9995% at output flows of 5, 10 & 15 NL/min. The H2 output pressure is regulated electronically and can be set from 0.5 to 10 bar.  
• Each instrument is equipped with high-performance communication interfaces, such as USB and RS485 (Ethernet and WLAN as options), to create a very flexible gas network with local or central control.
• Due to the software being focused on safety, automatic regulation, and intuitive and reliable communications, the HYDRO50LS2 High Flow High Purity Hydrogen Generators are easy to install, reliable, safe, and pleasant to operate.

Application Type:

• Combustion gas for FID Analyzers
• Carrier gas for Gas Chromatographs
• Fuel Cell Research, Protection gas

Gas

• Models: HYDRO50 LS2-5
• HYDRO50 LS2-10
• HYDRO50 LS2-15
• LMP Outflow @1013/20°C:
• HYDRO50 LS2-5: 5 LMP
• HYDRO50 LS2-10: 10 LMP
• HYDRO50 LS2-15: 15 LMP
• H2 purity: >99,9995% (maximum HC content: 0.1ppm)
• Dew point: -50°C
• Outlet Pressure: From 0.5 – 10 bar (7 – 145 psig).

Site & Installation

• Water quality: High-purity deionized water (DI water). TOC free.
•  Water source: Connection to central distribution network Onboard Deionized water generator
• Water consumption: 12L water generates about 12 m3 of Hydrogen
• Safety: Low H2 stored volume; overpressure valve; leak test; automatic shut down; maximum current limit; water quality
• Manual control: Through a 7” TFT-LCD color display with touchscreen, located on the front panel. Display of significant parameters, functioning status, and alarms. Intuitive navigation to functions by menus and sub-menus
• Remote control, Communications:
• Through 2 potential free relay contacts (I/O)
• RS485 (Mod-Bus), USB
• Through Ethernet 10/100 network
• Input & Output fittings: Stainless steel 1/4″ OD compression
• Power supply: Automatic switching from 90 VAC to 260 VAC, 47 to 63 Hz
• Power Consumption (Max at full flow): HYDRO50LS2-5: maximum 2000W HYDRO50LS2-10: maximum 2500W HYDRO50LS2-15: maximum 3000W
• Ambient temperature: +5 to +35°C, non condensing.

Dimensions & Weight

• Dimensions cm / in:
• L: 80cm / I: 55cm / H: 120cm (Variable)
• L: 31.4in / I: 21.6in / H: 47.2in (Variable)
• Net weight (kg/lbs): 80kg-100kg  /  176lb-246lb
• Warranty & Support: Additional items for your generator