- Home
- Companies
- Xinxiang Lifeierte Filter Corp., Ltd
- Products
- Lifeierte - Replacement Pall High-Flow ...
Lifeierte - Replacement Pall High-Flow Water Filter Cartridge
Replacement Pall high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the inside to the outside, ensuring that all contaminant particles are trapped inside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
- Applications: RO pre-filtration, seawater desalination pretreatment; power plant condensate filtration; biopharmaceutical industry API, solvent, water filtration, etc.
- Filtration media: Water suspended matter, particulate matter, water dirt, bacteria and algae, rust, etc.
- The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
- The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
- The design of convenient handle significantly reduces the time of cartridge replacement and makes cartridge replacement simple and portable.
- The overall polypropylene design and hot melt welding treatment effectively prevent the end cap from falling off and secondary pollution.
- The design of sealed interface reduces the risk of bypass flow and ensures the sealing and reliability of filtration.
- The folded design increases the filtering area and makes the pressure drop significantly lower than that of ordinary cartridge.
- The design of large diameter increases the dirt holding capacity, prolongs the service life and reduces the production cost.
-
Large throughput cartridge; large dirt holding capacity; easy installation
InstallationEasy installation:
Compact structure, easy to move, convenient maintenance, smooth operation.
-
Sealed interface design,Adopt rubber sealing ring.Interface
Sealed interface design:
Safe and non-toxic, eliminating leakage.
-
Using excellent materials.Material
Using excellent materials:
The high-flow cartridge`s external inlet and internal outlet construction allows for easy cartridge replacement while keeping contaminants trapped on the outside of the cartridge.
-
Ease of use of equipment.Convenient
Ease of use of equipment:
Multiple cartridges can be packed in the filter housing, allowing a wide range of flow rates to be used.
- Filter Media: Polypropylene(PP), Glass Fiber
- Length: 20"(508mm), 40"(1016mm), 60"(1524mm)
- Outside Diameter: 6 inch (152mm)
- Inside Diameter: 73.5mm
- Filtration Rating: 1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm
- Support/Drainage: Polypropylene (PP) Or without
- End Cap Material: Glass fiber reinforced Polypropylene (PP)
- Outside: Rigid Hard Cage, Belt,Stainless Steel(special)
- Seal Material: EPDM, Buna-N, Viton
- Maximum Operating Temperature: Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C
- Maximum Differential Pressure: Pleated glass fiber:3.4 Bar at 121°CPleated PP: 3.4Bar at 82°CMelt Blown:1.03Bar at 65°C
- Recommended Change out Differential Pressure: 2.5Bar at 20°C