LNEYA - Model SUNDI -25℃ ～ 200℃ -Industrial Chiller Systems
Use high temperature resistant low-temperature magnetic drive pump or a leak-free high and low-temperature shield-driven pump, reduce the risk of system leakage. At the same time, the system has the advantages of low noise and big traffic flow.
- Temp. range : -25℃～+200℃
- Control Mode : Feedback PID + Our special dynamic control calculation, PLC controller
- Temp. control : Process temp. control and jacket temp. control model
- Temp.
- difference : Set or control the temperature difference between jacket oil and raw material process
- Program Editor : 10 programs, each program can edit 42 steps.
- Communication
- Portocol : MODBUS RTU Protocol, RS485 interface
- Material temp.
- feedback : PT100 OR 4～20mA or communication（normal: PT100)
- Temp. feedback : The temp. of three points: the inlet and outlet of equipment,reactor material temp.(external temp. sensor)
Typical application of refrigeration heating temperature control system
Dynamic thermostatic control of cold and heat source of high pressure reaction kettle, dynamic thermostatic control of double layer glass reaction kettle, and dynamic thermostatic control of cold and hot source of double-layer reactor.
Microchannel reactor thermostatic control, small temperature control system, steam - feeding system temperature control, material low temperature aging test.
The thermostatic control of the combined chemical cold source heat source, the cooling heating of the semiconductor equipment and the heating temperature of the vacuum chamber are controlled.
Advantages and functions of temperature control system of refrigeration
- Temperature range from 120 to 350, performance superior, unique, high - precision, intelligent temperature control.
- High cooling power from 0.5 to 1200kW, highest production stability and repeatable results.
- Multi-function alarm system and safety function, use plate heat exchanger, tube type heater to increase heating and cooling rate.
- 7-inch and 10-inch color TFT touchscreen graphics display, use magnetic drive pump, no re-seal leakage problem.
- Full airtight system, extended thermal conductivity liquid life, very wide temperature range, no need to change liquid media.
- Ultra-high temperature cooling technology can be cooled directly from 300 degrees of high temperature.
- The principle and the function have many advantages to using staff: because the only expansion of cavity in the body heat conduction medium contact with oxygen in the air (and expansion tank temperature at room temperature to 60 degrees), can achieve lower heat conduction medium absorbed by oxidation and the risk of air moisture.
- No heat conduction medium evaporates at high temperature, and it can be achieved -80 ~ 190 degrees, -70 ~ 220 degrees, -88 ~ 170 degrees, -55 ~ 250 degrees, -30 ~ 300 degree continuous temperature control without pressurization.