- Home
- Companies
- GeoSIG Ltd
- Products
- GeoSIG - Model ETH-T1L - Long Distance ...
GeoSIG - Model ETH-T1L -Long Distance Ethernet Module
Based on the new 10BASE-T1L standard, the ETH-T1L module is an innovative technology and ethernet switch for fast data communication over a long distance. This ground-breaking solution provides a single-pair cable-based Ethernet infrastructure for data and power over 1200 meters. It is an ideal solution for connecting accelerographs, recorders, and other data-intensive devices in vast installation settings allowing data transmission at speeds up to 10 MBps. The cost-effective cable and the simplicity of the wiring are the highlights of ETH-T1L, which empower and extend the capabilities of GeoSIG products, such as ela and albris.
- 2 ports 10BASE-T1L
- 2 ports 10/100BASE
- Standard TCP/IP network
- Power over Ethernet (PoE), no need to power any device separately
- Up to 1200 m of cable between modules
- Simple installation with screw-terminals
- Cost-effective cable
- Reduced installation time
- Unlimited possibility of extending the network to cover any distance
- Fully compatible with GeoSIG products
Long distance link
- Number of ports: 2, both can be used as power source
- Standard: 10BASE-T1L, (IEEE 8-2.3cg-2019)
- Communication speed: 10 MBps
- Link Length: Up to 1500 m (data only), 1200 m (data + power)
- Max delivered power: 30 W per port (IEEE 802.3at, Type 2)
Standard ethernet link
- Number of ports: 2, both can be used as power source (PoE)
- Standard: 10BASE-T, 100BASE-TX, (IEEE 802.3u)
- Communication speed: 100 MBps or 10 MBps
- Link Length: Up to 100 m, PoE
- Max delievered power: 30 W per port (IEEE 802.3at, Type 2)
Cables and connectivity
- 10BASE-T1L Cables: 1x2xAWG18 (Data + Power), max 8 devices. ²
- 1x2xAWG22 (Data + Power), max one device < 5W
- 1x2xAWG24 (Data Only)
- Recommended cable type: Compliant with IEC 61156-13 or IEC 61156-14
- Recommended cable impedance: 100 Ω
- Ethernet Link Cable: Min 2x2xAWG24, Cat5e or better
- Connector: Internal screw terminals or external connectors ¹
Physical and environmental
- Type and IP rating: Steel or Stainless Steel¹ housing. IP66
- Size and weight: 205 x 150 x 80 mm, < 2 kg
- Input voltage: 54 V or AC/DC adaptor ¹
- Power consumption: < 1.5 W, excluding cable losses
**Specifications subject to change without notice
1) Optional
2) Actual number of connected devices depends on the device, wiring configuration and cable length