Lord - Model Maxlok MX/T6S -Acrylic Adhesive

LORD® Maxlok MX/T6S acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.

Shelf Life/Storage:

Shelf life of each component is nine months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.

LORD Maxlok MX/T6S acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.

• Versatile – bonds a wide range of unprepared metals with minimal substrate preparation.
• Temperature Resistant – performs at temperatures from -40°F to +300°F (-40°C to +149°C).
• Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.
• Precise Bondline – allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01” (0.025 cm) diameter.
• Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

• Handling Time: 20 to 24 min @ 77°F (25°C)
• Working Time: 6 to 9 min @ 77°F (25°C)
• Mix Ratio: 1:4 by Volume
• Color: Gray Paste