- Home
- Companies
- SPX Technologies
- Products
- Tamco - Model Series 1000 - Low Leakage ...
Tamco - Model Series 1000 -Low Leakage Airfoil Control Damper
The Tamco Series 1000 Low Leakage Airfoil Control Damper is engineered for optimal air flow control in both modulating and two-position applications. Constructed for scenarios with elevated humidity or high dust and dirt levels, its design emphasizes durability and efficiency. The damper linkage and bearing systems are robust, requiring minimal maintenance that can be efficiently performed using compressed air or steam cleaning. Additionally, the Series 1000 offers customizable options like the Elevated Temperature (ET), Moisture Resistance (MR), and Salt Water Resistance (SW), allowing adaptation to diverse environmental conditions. This product is ideal for both commercial and industrial settings where precise air management is crucial. Tamco's commitment to innovation is evident in its construction, ensuring long-lasting performance and reliability.
- All-aluminum construction provides a prolonged and rust-free operational life.
- Tamco’s dual bearing linkage system is self-sealing, self-lubricating, and non-absorbent, resulting in a maintenance-free performance.
- Side seals are comprised of extremely flexible silicon and blade seals are EPDM that are resistant to weathering, compression set, and heat.
- Tamco seals provide outstanding dynamic fatigue resistance, ensuring consistent minimal leakage rate performance and sealing longevity.
Series 1000 Low Leakage, Airfoil Control Damper:
Modulating or two-position control dampers are required:
- Where maintenance-free operation is ideal
- Where linkage failure is an issue
- Where worn out common dampers require replacement
- Standard blade depth is 6” (152 mm).
Options are available for the airfoil control damper (Series 1000) which can be upgraded to the following options to suit a wider range of applications:
ET – Elevated Temperature Option:
- Blade and frame seals are upgraded to extruded silicone.
- For operation in temperatures as high as 300°F (149°C)
- Bronze-oilite bearings replace Celcon and polycarbonate bearings.
MR – Moisture Resistance Option:
- Stainless steel hardware replaces zinc-plated components.
SW – Salt Water Resistance Option:
- Extruded aluminum frames, blades and hardware are clear anodized to a depth of 0.7 mil. (18 microns).
- Blade and frame seals are extruded silicone.
- All zinc-plated, steel hardware is replaced with stainless steel, protecting hardware from rust and corrosion.
SP – Standard profile
- Manufactured with 4” (101.6 mm) deep frames
- Manufactured with blades that are a maximum 6” (152.4 mm) deep.
NP – Narrow Profile
- Manufactured with 4” (101.6 mm) deep frames
- Manufactured with blades that are a maximum of 4” (101.6 mm) deep.
- Space saving narrow profile is ideal for space restrictive installations.
WP – Wide Profile
- Manufactured with 6.5” (165.1 mm) deep frames
- Manufactured with blades that are a maximum of 6” (152.4 mm) deep.