Major - Model 5200X - Solid Handling Sump Pumps
From Solid Handling Sump Pumps
Motor – Highest quality, nationally known and serviced. Vertical, ball bearing type available in single phase, polyphaser and direct current electrical ratings and in drip-proof, totally-enclosed and explosion-proof construction.
-
Most popular related searches
Applications
- Wastes
- Paper Pulp
- Food Solids
- Beet Pulp
- Storm Water
- Tannery Wastes
Capacities
- Capacities to 2000 G.P.M.
Specifications
- Motor Support Bracket – Cast Iron. Machined to registered fit insuring perfect alignment of motor and pump shaft.
- Flexible Coupling -Three piece jaw and cushion type, accurately machined, key-seated and balanced.
- Ball Thrust Bearing – Mounted in dust sealed, moisture proof and grease lubricated housing, elevated 10“ above pump plate. Carries thrust load and weight of impeller – shaft assembly. Bearing locknut and collar provide axial adjustment of pump shaft to restore proper impeller clearance when required.
- Float Switch – U/L listed, two pole type, mounted on motor height pedestal to facilitate wiring. Available in NEMA 1 General Purpose, NEMA 4 Watertight and NEMA 7 Explosion-Proof Enclosures.
- Pump Plate – Individual pump plate permits removal of entire unit without disturbing basin cover or second pump of a duplex set. Provided with hoisting eye for easy pump installation.
- Column – Rigid, wrought steel, enclosing drive shaft. Tongue and groove construction for proper alignment.
- Shaft – High-carbon, special accuracy steel. Turned, ground and polished throughout its entire length. Shaft diameter is oversize to prevent deflection and provide smooth operation.
- Volute – Close-grained cast iron of streamlined design affords maximum strength and efficiency. Suction plate easily removed for inspection of impeller.
- Impeller -Accurately machined, balanced, board, keyseated and securely locked to shaft.
- Shaft Bearings – Replaceable bronze, accurately board for proper alignment and running clearances. Intermediate bearings , when required are spaced to prevent shaft vibration.
- Lubrication – Exclusive Swaby “Transverse Flush” lubrication provided for ball thrust bearings. Clean lubricant purges contaminated grease through bearing and out bottom drain. Eliminates possibility of excessive lubrication. Individual grease lines extend from all radial bearings to central point above pump plate. Automatic solenoid oilers available.
Customer reviews
No reviews were found for Major - Model 5200X - Solid Handling Sump Pumps. Be the first to review!