Mayim™ - Flood Barriers and Water Diversion Walls

The Mayim flood control system consists of a straight main barrier section that is supplemented by 30 degree curved pieces (inward and outward), allowing you to create a customized line of defense against floods. Curve barriers enable installation around obstacles and can change the barriers’ direction and shape. For example, if you need to turn around a square property, use two Outward Curve sections on each corner to create a 90 degree turn at each corner. If you need to handle an L-shaped configuration, use two Inward Curve sections at the inside of the “L”. For more information on configuration and installation, visit our installation instructions HERE.

The underside and overlaying edge of each barrier has a foam seal that prevents slippage and stops water from penetrating beneath and between barriers. The more water rises and ballasts the barriers, the stronger the seal. When configured properly, Mayim barriers can withstand water levels within 1” of its top surface.

Mayim barrier are ideally suited for relatively level surfaces, but are somewhat flexible and will contour slightly to the varying ground below, particularly when ballasted by sandbags or water. Mayim Barriers is not only suited to providing flood protection and water diversion, it is ideal for creating water and chemical containment pools (with a liner added).

Unlike cumbersome sandbags, which are hard to fill, remove and disposed of after a flood event, the Mayim Barrier is simply hosed down after use and stacked for future deployment.

Dimensions & Weights.