Thermal-Lube - Model XL2352 -Medium Drying Non-Flammable Dry-Film Lubricant with Graphite

Although this procedure is adequate with most applications, to achieve maximum corrosion and rust resistance, surfaces should be thoroughly cleaned and sandblasted prior to application.

Once dry, XL2352 forms an exceptionally stable, rust/corrosion resistant, and tough micro-graphite coating highly resistive to temperature fluctuations from –60°C to 400°C.

Because of its excellent adhesion to metallic surfaces and dry film consistency, XL2352 reduces potential environmental problems caused by conventional lubricating greases due to water wash-off from rain and snow, and product melting from exposure to the sun.

XL2352 offers:

• Thin opaque film
• High lubricity
• Lubricates at temperature extremes
• Excellent adhesion
• Good electrical conductivity
• Excellent rust and corrosion resistance
• Room temperature curing
• Prevents galling, fretting & seizing
• Long lasting
• Will not plug application equipment

XL2352 is volatile in nature and may evaporate during storage. Preparation involves mild agitation and dilution (if required) to the consistency required for the application method chosen.

Can be applied by spray, brush, dip, or roller methods. Always agitate thoroughly prior to use.

Coating air dries to touch in less than ten minutes under normal ambient conditions. Full cure properties develop in approximately thirty minutes depending on the film thickness.