- Home
- Companies
- Euromesh BV
- Products
- Euromesh - Mesh Coalescer
Euromesh - Mesh Coalescer
EUROMESH Mesh Coalescer is used for liquid/liquid separation, when a mixture of two liquids are immiscible or non-soluble in one another. The Mesh Coalescer often consist of a combination of wires and fibers in order to create a maximum surface area for droplets to coalesce. In many cases the wires are made of different material grades, where one is hydrophilic (e.g. metal alloy) and the other is hydrophobic (e.g. polyester), which enhances the separation. Studies have shown that there is an increased coalescence effect at the junction point between both wire materials. By using a combination of metal and plastic monofilament wires (or fibers(, the coalesce efficiency increases significantly.
The following areas of application can be identified:
- Production and Test Separators
- Gas Scrubbers
- Gas Knock-out Drums
- Slug Catchers
- Produced Water Degassers
- Flash Drums
- Flare Knock-out Drums
- Free Water Knock-out Drums
- Enhanced Oil Recovery Systems
- Mitigation of Wave and Sloshing Effects
Euromesh BV, as member of the Zeta Engineering Group, adopt a detailed approach to the fabrication and manufacturing of separation equipment, and deliver practical- and credible engineering, process design expertise and efficient separation solutions, which are all based on the extensive range of “state of the art” internals technology.
Our wide range of Separation Technologies encompasses:
- Gas / Liquid Demisting Devices
Demisting Cyclone, Vane Type, Mesh Type, In-line Gas, Cleaner (IGC) and Customised Solutions.
- Gas / Liquid Coalescing Devices
Mesh Agglomerator, Vane Type and Customised Solutions.
- Liquid / Liquid Coalescing Devices
Mesh Coalescer, Plate Pack and Customised Solutions.
- Inlet Devices
Various Inlet Vane-type, Inlet Cyclones, Enhanced De-oiling and Degassing models, ZPV Inlet and Customised Solutions.
- Distribution / Calming Devices
Straightening Baffle, Perforated Distribution- and or Calming Baffle and Customised Solutions.
- Miscellaneous Internals
Degasser- and Defoaming Internals, Sand Jetting Systems, Vortex Type Sand Removal Systems, Customised Solutions.
- Consultancy Services –
Process Design Studies, Computation Fluid Dynamics (CFD), Finite Element Analysis (FEA).
The company has an extensive background in trouble-shooting, de-bottlenecking and revamping at client’s production facilities. This gives an unrivalled ability to provide the most functional, cost effective design, along with the commitment to assess future abilities by applying our “whole life” concept and principles of BATNEEC # Best Available Technology Not Entailing Excessive Costs.
Our knowledge and unique range of Separation Technologies allows us to supply bespoke equipment, purposely designed and manufactured for Onshore applications, Offshore platforms, Semi-submersibles, Tension Leg Platforms (TLP) and Floating Production Units (FPUs).
All of our separation equipment is fully trial assembled and inspected, before delivery to the client. In addition, a full-sized mock-up of the vessel and the installation can be undertaken. Finally, it is our practice to offer the services of our qualified project management staff members whenever our equipment is to be installed, whether this requires their attendance onshore or offshore.