- Home
- Companies
- Wheelie bins & Waste containers Factory ...
- Products
- Wheelie bins Weber - Model MGB 1100 L ...
Wheelie bins Weber - Model MGB 1100 L RL LIL -Mobile Waste Containers
Manufactured in accordance with DIN EN 840 (Parts 3, 5 and 6) and RAL GZ 951/1. High-quality, high-density polyethylene (HDPE). UV stabilised; resistant to frost, heat and chemicals. Suitable for both DIN and comb-lifting devices (form A according to EN 840-3). 200 mm diameter quiet-running, solid rubber castors with 360° swivel range. Standard equipment features 2 x wheel stops (double-stop); also available with central braking.
- all metal parts are zinc plated and thus corrosion-resistant
- easy-to-move, spring-supported sliding lid, lockable
- the lid is attached to the body with high-strength polyamide hinges; corrosion-protected metal springs keep the lid closed
- easy filling through additional smaller lid
- can be easily manoeuvred using the side handles on the bin
- features a standard 2-inch water drain including drain plug
- all usual colours and combinations (e.g. grey, blue or green) available
- Nominal volume 1100 L
- Nominal loading capacity 440 kg
- Measures / sizes in mm: H/D/W: 1460 x 1065 x 1372
Lifting trunnions with safety stopper
Our plastic four 4 wheeled recycling bins can be fitted with lifting trunnions (for DIN devices) in accordance with EN 1501-5. The trunnions of mobile waste containers are reinforced with steel insert and can be supplemented with safety stoppers, if required.
Side handles
The stable side handles are the perfect solution for improving the manoeuvrability and ease of lifting of our four 4 wheeled mobile waste containers. The ergonomic handles are in accordance with EN 840-2. If you wish to have your mobile garbage bins with a central braking system, the side handles are incorporated as standard.
Travelling gear with central braking
As an option, the mobile garbage bins/trash cans, with lid in lid, can be supplied with a central braking system. The pedal of the central braking system is located at the right side of the waste container. By depressing the pedal of the mobile waste containers, the swivel rings and brakes of the two front wheels will be locked. You can easily unlock the system by inserting a triangular key into the right side handle of your mobile garbage bins.
Fixture for padlock
The four 4 wheeled trade waste containers are equipped with a fixture for a padlock. This allows the main lid to be secured against unauthorised opening. The padlock is not included in the scope of delivery.
Steering locks (directional locks)
The castors on our roll top refuse bins can also be fitted with steering locks. Two castors are fitted with the locks leaving the other two castors to swivel freely.
Marking with hot-foil printing
Customised and permanent marking of our mobile waste containers is available at a surcharge. Our commercial waste containers can be hot-foil printed in a single colour on the lid and/or on the body.
- Wheel variations for special applications
- Manual lid locking devices
- Foot pedal lid opener
- Towing kit