Badger Meter, Inc.
Model B2800 -Advanced Microprocessor-Based Flow Monitor
The B2800 is an advanced microprocessor-based flow monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 is configured at the factory for units of rate and total. Or, the unit may be easily programmed in the field. The monitor has a large two-line display and is available in power and mounting options to suit almost any application.
Most popular related searches
hazardous area enclosure
flow monitoring
flow meter
mechanical flow meter
hazardous area
hazardous area regulations
flow meter calibration
field monitoring
explosion modeling
Power Supply Options
- Loop-powered: Two-wire, 4-20 mA output, 30 VDC maximum
- Battery: One"D"-size 1.5 VDC alkaline battery provides up to 3.5 years of service
Mounting Options
- Meter Mount: Mounted directly on top of the flow meter
- Remote Mount: Connected to the meter via cable, up to 100 feet (30.5 meters)
- Swivel Mount: Bracket between B2800 and flow meter allows 180° adjustments
- Portable: Portable version includes handle and magnetic pickup
- Panel Mount: Fits 3.6" x 3.6" (91mm x 91mm) control panel cut-out
- Explosion-proof: CSA-approved enclosure for hazardous locations
Program Level
- Standard:
- Displays in four selectable units of measurement and total: GPM/Gallons, LPM/liters, M3PD/cubic meters, or BPD/barrels
- Advanced:
- User-selected units for rate:
- Gallons, oil barrels, cubic feet, liters, cubic meters, MGal, MLiters, Acre Ft, Liquid Barrels, Lbs., Kgs.
- User-selected units for time:
- Day, Hour, Minute, Second
- In addition, the advanced version offers the capability for in-field calibration of the flow meter, up to 10 data points.
Certifications
- CSA Intrinsically Safe:
- Class I, Division 1, groups C&D
- Class II, Division 1, Groups E, F & G
- (note: does not apply to panel mount model)
- CE: IEC 61326-1
- CSA Explosion-Proof:
- Class I, Division 1, Groups B, C & D
- Class II, Groups E, F, & G
- Class III, Type 4X, T6 @ 70 °C
- (note: applies to explosion-proof model only)